Maxxair 4301k Circuit Board Replacement

Question

Question:

I have a Maxxfan-smoke 4301k that will not turn on, I need to replace the circuit board, I am unable to find a replacement board for that model. Do you have a replacement circuit board for this model? Thank you

asked by: Keith E

0

Expert Reply:

The replacement circuit board for your MaxxFan 4301K Series is the Replacement Printed Circuit Board and Switch for MaxxFan 4301 Series Roof Vents # MA10-04301K-V16.

expert reply by: Jameson C

0

Answer 1

For your MaxxFan that is a 4301 Series the correct circuit board is the part #MA10-04301K-V16.

view full answer...

Answer 2

According to the manufacturer, if the controls are not working correctly the circuit board Item #MA10-04301k-v16 is malfunctioning on your MaxxFan Roof Vent Item #MA00A04301K. Since you have replaced the circuit board already and it is doing the same…

view full answer...

Answer 3

The replacement circuit board for your MaxxFan 4201 Series is the Replacement Printed Circuit Board and Switch for MaxxFan 4301 Series Roof Vents #MA10-04301K-V16. The 4201 series circuit boards may look different compared to the upgraded circuit…

view full answer...

Answer 4

The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents #MA10-04301K-V16 is the upgraded circuit board from what you sent in a picture of (4201). This will still work for you and will give you a more reliable board.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 10

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 11

My contact at MaxxAir advised that there are three potential causes for the beep and no fan motion you're experiencing with your MaxxFan Trailer Roof Vent #MA00-04000K. One potential cause is that the unit was wired with incorrect polarity. Make…

view full answer...

Answer 12

Hey Luis, for your 2018 Ford F-350 that doesn't have the OEM pucks you would want the B and W Turnoverball hitch part #BWGNRK1116 that is a confirmed fit for your truck. I really like the B and W gooseneck hitches as they are known to be the…

view full answer...

Maxxair 4301k Circuit Board Replacement

Product Page this Question was Asked From

Continue Researching