Replacement Manual Crank Recommendation for Lippert Powered A-Frame Jacket

Question

Question:

I have a Lippert electric tongue jack. LC285318. The power was out on my trailer, so I tried manually using jack. I noticed that the plastic nut on the manual rod was broken. Where can I buy another one?

asked by: Arne B

0

Expert Reply:

For a replacement manual wrench for your powered Lippert jack part # LC285318 you would want the part # LC285324. Or if you need to operate the manual crank right now grab a 3/4 inch socket, extension, and ratchet and you'll be able to turn it manually with that as well.

expert reply by: Jameson C

0

Answer 1

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 2

The best cover for your 2018 R-Pod 180 is the Classic Accessories PolyPRO 3 R-Pod Trailer Cover #CA80-197-171001-00. It is a confirmed fit for your 180 and has zippered panels for access to your door. It features a triple-ply top and single-ply…

view full answer...

Answer 3

To raise your Lippert jack manually, you will need the Lippert Replacement Crank Handle #LC285324. This is designed to be used with standard Lippert Components manual scissor jacks as well as Lippert power tongue jacks in the event of a power…

view full answer...

Answer 4

The Bauer Products Camper Door Lock #BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks,…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 10

The correct replacement gear motor that replaces the Power Gear 1510000006 on your 2006 Fleetwood Fista is the Replacement PowerGear RV Above Floor Slide-Out Motor #LC368417. The Replacement Gear Motor #LC368193 you were looking at will not work…

view full answer...

Answer 11

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...