Replacement Jack Handle for a 1,500 Fulton Jack FXP15W with 10 inches of Lift
Question:
Two things: I need a crank for a Fulton 1500# trailer jack. 8inch wheel, 10inch lift. I also need a crank for a winch with a 1x3/8inch slot. Its marked K2500, couldnt see manufacturer. Thanks for any help,
asked by: Bill R
Expert Reply:
It sounds like the jack you have is the Fulton Jack part # FXP15W. This is a Fulton jack with a 1,500 lb capacity with 10 inches of lift. The correct crank for this jack would be the Replacement Sidewind Handle Kit # F0933305S00.
Without more information on your winch I really can't recommend you a replacement handle. I tried searching for K2500 and couldn't find anything relating to a winch. If you could maybe look again for a brand name, another part number or send me a picture I can see what I can find.
Product Page this Question was Asked From
Replacement Sidewind Handle Kit for Fulton XP15 Series Marine Jacks
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Fulton
more information >
Continue Researching
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Lights and Trailer Harness for SnowBear Trailer
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Replacement Sidewind Handle Needed for Fulton Magnum Series 1000 LB Jack
- Q&A: Diameter Of Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks
- Q&A: Sleeve Washer for Fulton Swivel Jack to Prevent it From Leaning
- Q&A: Replacement Handle for Fulton Magnum Series Jack
- Q&A: Are 800 lb and 1,500 lbs Replacement Fulton Trailer Jack Handles Interchangeable
- Q&A: Replacing Hubs and Leaf Springs on a Small Utility Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Best Boat Trailer Jacks
- Article: Trailer Tire Sizing