Replacement Sidewind Handle Needed for Fulton Magnum Series 1000 LB Jack

Question

Question:

trying to decide what sidewind handle to buy to replace one that broke off. The only identifying info on the jack is Fulton Magnum series 1000lbs. Wondering if we need the 0933301s00 or the 0933305s00? Thank you

asked by: Karalee E

0

Expert Reply:

The Replacement Sidewind Handle Kit, # F0933305S00, is going to work for Fulton jacks with up to a 1,500 lb capacity so this would work for your 1,000 lb Magnum series jack.

Part # F0933301S00 is going to replace handles on Fulton jacks with up to an 800 lb capacity.

expert reply by: Leah S

0

Answer 1

I checked and unfortunately there is no replacement handle for the square tube Fulton Marine Jack #HD50000101. I realize this is not the news you are looking for, but the only option if your handle is broken is to replace the jack with a new one.

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes Tarek, the Timbren Suspension Enhancement System #T75MR will work fine with your 2023 Ford Raptor.

view full answer...

Answer 10

Thanks for the picture! For your 2023 GMC Sierra 1500 with adaptive ride control you'll want the Air Lift LoadLifter 5000 Air Helper Springs item #AL57388. This air bags have a 5,000 lbs load leveling capacity that will keep the rear end of your…

view full answer...

Answer 11

The Firestone Ride-Rite Air Helper Springs #F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. These have a 5,000lb capacity to enhance your factory suspension under load. This will not…

view full answer...

Answer 12

The air bag kit I recommend going with to fit the Adaptive Ride Control on your 2022 GMC Sierra 1500 Limited is the Firestone Ride-Rite Air Helper Springs #F2609. Even though there are a limited amount of air bags that fit your vehicle, the Firestone…

view full answer...

Replacement Sidewind Handle Needed for Fulton Magnum Series 1000 LB Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching