Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, Steve here with etrailer.com. Today we're taking a quick look at a replacement cap nut that's made out of zinc. So folks, this cap nut fits a 5/8 inch diameter roller shaft. You get quantity one. And again, 5/8 diameter roller shaft. Overall, this guy is right at 1 1/4 inches, give or take on the outside flange.
But again, the inside fits a 5/8 inch diameter roller shaft. Well, folks, that's gonna wrap it up for our quick look today at this replacement cap nut in zinc. I'm Steven, thanks for watching.
Average Customer Rating: 4.9 out of 5 stars (172 Customer Reviews)
Just what I needed worked out perfect
Looks like it will work. Might order a second one to match the other side.
The nut went on fine first time these things being call a pal nut by some people are normally fair from a pal
This product went on easy and bottomed out on the shaft
Product received was just as ordered and advertised.
The exact replacement parts that I needed. Great customer service with quick shipping. Highly recommended.
still working!!
Had hand truck with 5/8” axel. Lost an axel cap moving lawn & garden debris bags. Checked Lowe’s & Home Depot hard-to-find hardware trays to no avail. Largest size was 1/2 “. Found your company on Internet while searching “axel caps”—it was among first to pop up! Ordered a bag of extras as I know eventually I will lose another! Thanks to etrailer, I found the right sized axel cap—and I don’t even own a trailer!
Purchased this for my air compressor wheel axle. I couldn’t find this size at multiple stores where I live. Searched on etrailer, ordered them, and received them quickly. Air compressor now has new wheels and are firmly in place.
Sam
7/19/2019
One year later, my compressor wheels are still held in place solidly.
Perfect part for our job
My hand truck lost it's friction fastener that keeps the wheel on the axle. This inexpensive, but highly functional, fastener solved the problem.
Saxangler
3/5/2018
Still working great!
wil install next weekend but all good that why i deal with u all
haven had issue relating to products nor etrailer staff
will contiuned to buy no matter what
after the crash in 2008 all discout store closed and all i have is you all
keep up with the good work
I have 6 keel roller and i fish alot is salt
they broke which is normal
i replaced rubber roller and needed the caps to finish off
i order rubber keel roller from you befere the project
didn't remove boat from trailer just locked toung to truck and bottle jacked boat very carefully then added 6 x 6 wood , piece of cake
Exactly what I needed. Last year, I bought a [trash can] from [hardware store]. It's a fantastic product, but it uses 5/8" pal nuts to hold the wheels on the axle.
When one became dislodged and lost, my trash can was out of commission. A trip to [hardware store] and [industrial supplies company] was unsuccessful, and [trash can brand] only offered entire wheel kits for their products. etrailer saved the day by carrying these and selling them in small quantities.
Needed 2 to hold the wheels on my pressure washer and could not find any at the hardware stores around here. Just what I needed and so far are working good.
Lowell
7/19/2019
Still working after a year of service.
Worked perfect for replacing wheels on my hand truck. I couldn’t find the size I needed locally, but found them on etrailer!!
Sandy
5/31/2022
Still working after a year !
Got it right the first time and out the door. I had the order 5 days after ordering.
Holds roller shaft in place on my boat trailer.
I needed to replace a wheel on a recycling container and this nut was the EXACT replacement part. A Harbor Freight wheel and this nut were the low cost repair and had me rolling again quickly. Shipping was very quick and allowed tracking.
I had to cut the old caps off in order to replace wagon wheels. These replacement caps worked great and are still holding the wheels on.
I looked in all the usual places for a simple part; a 5/8" axle cap for a two wheel dolly. No one had anything bigger than 1/2". Even on the net, I did come across one other source but you had to but quantity. So I was very happy to find etrailer. I got the part in a couple of days. The price was very reasonable. i'll keep them on my list for future searches.
can't figure out why 3 axle capnuts couldn't be mailedto rosebud,mo. directly. instead package left st.louis area,went to Kansas city,back to st.louis and then to rosebud. thank goodness it was free shipping. other than that , yes they are axle cap nuts.
Just as implied. Better than the product at the local tractor supply store
Larry
7/7/2020
Never failed. Still good
I spent weeks trying to find this exact product in any hardware store in my area. It was impossible. Luckily a friend gave me etrailer's website and I found it within minutes! Ordered it and it was the perfect fit. And so cheap too!
The cap nuts I received were a perfect fit and work great. It’s good to have my boat trailer back in service.
Good product. Secured the wheels on my two wheel hand dolly. Etrailer service was even better. This small order was quickly shipped & I had my product in a very few days.
We used this to replace the axle cap on a two-wheel dolly and Tom, our tool man, reports that it, "fits perfect."
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim S.
4/5/2019
Doing what its supposed to do.