Installing Boat Trailer Roller Assembly
Question:
How do I fasten the bracket with 7/16 screws with the spool on the bracket. Seems hard to get screw and tools underneath black spool. Do I need to remove the spool so I can tighten screws after I drill holes in trailer. If I need to remove spool how do I do that? Do those end caps come off so I can get to spool long center screw? Or is it possible to fasten the ce 32100g with spool on the bracket. Thank you in advance
asked by: Gary S
Helpful Expert Reply:
The CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4" # CE32100G can simply have a pal nut removed to pull out the pin and remove the roller and then install the bracket. Reinstall the pin and roller with the pal nut/cap nut. If you do this carefully it won't damage the pal nut, however if you don't then you can use # CE10801 to replace it.
It is possible to install the unit without removing the roller depending on the angle you use for the hardware.
Products Referenced in This Question
Replacement Cap Nut - Zinc - 5/8" - Qty. 1
- Accessories and Parts
- Boat Trailer Parts
- Hardware
- 5/8 Inch Diameter
- Nuts
- Cap Nut
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"
- Boat Trailer Parts
- Rollers
- Spool Roller
- Black Rubber
- 4 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"
- Shop: Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19" Pilot - Stainless Steel
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long - 1 Pair
- Q&A: Is The Roller On The CE Smith Spool Roller Assembly Removable?
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32100G Review
- Search Results: calkins trailer parts
- Search Results: trailer winch
- Q&A: Base Dimensions of the Single-Speed Boat Trailer Winch Part # 315-W1800D
- Q&A: Mounting Base Dimensions for Fulton Single Speed Trailer Winch # F142306
- Q&A: Parts Found In Pictures for CE Smith Bow Roller Bracket # CE31005PG
- Q&A: What Brackets Needed to Install Bunks on Boat Trailer
- Q&A: Dimensions of Mounting Plate and Total Height of Fulton Single Speed Trailer Winch
- Q&A: Recommended Strap For Fulton Single Speed trailer Winch F142201
- Shop: TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs
- Shop: 2-Speed Boat Trailer Winch with 20' Strap - 2,000 lbs
- Shop: Fulton Single Speed Trailer Winch - 9" Long Handle, 20' Strap - Zinc - 1,800 lbs
- Shop: Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Tire Sizing
on Boat Trailer Parts
