How To Find Correct Length Keel Roller For Older Trailer
Question:
1973 tee nee trailer middle keel rollers are the 12 in or 10 in thank you
asked by: Mike
Expert Reply:
I can help you find the correct sized keel rollers that you need. Most Keel Rollers fit either a 5/8 inch shaft or a 1/2 inch diameter shaft. You want to know the diameter of the shaft that the rollers fit on. The easiest way to figure out the length of the Keel Roller that you need is to measure the distance between the brackets on the roller assembly.
All of the 10 or 12 inch Keel Rollers we carry fit a 5/8 inch diameter shaft. I recommend Yates Keel Roller part # YR12244-125EC if your Keel Roller is 12 inches long. If your Keel Roller is 10 inches long, I recommend Yates Keel Roller part # YR10000. Both of these Keel Rollers are constructed of heavy duty rubber and fit a 5/8 inch diameter shaft. You can replace the end caps with part # CE10801.
Products Referenced in This Question
Replacement Cap Nut - Zinc - 5/8" - Qty. 1
- Accessories and Parts
- Boat Trailer Parts
- Hardware
- 5/8 Inch Diameter
- Nuts
- Cap Nut
- CE Smith
more information >
Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 10" Long - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3-3/8 Inch Diameter
- Black Rubber
- 9-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 12" Long - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3-3/4 Inch Diameter
- Black Rubber
- 11-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability Of PVC Keel Roller That Is Self Centering
- Q&A: Which Crossmembers Will Benefit Most on Boat Trailer from CE Smith Self-Centering Keel Roller
- Q&A: Where To Install a CE Smith Self Centering Keel Roller
- Q&A: Can CE Smith Keel Roller CE29505 be Used With Jon Boat Trailer
- Q&A: Recommended Guide to Center 1850 Lund Impact on Shorelander Boat Trailer
- Q&A: How To Add Self-Centering Rollers To Shorelandr Boat Trailer
- Shop: CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber
- Shop: CE Smith U-Bolt - Zinc-Plated Steel - 4" Long x 3-1/8" Wide x 7/16" Diameter - Qty 1
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Q&A: Does The Redline Grease Seal 13194 Have Markings Of TCM 13194 TM and a Spring On The Inside Lip
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Measure for Trailer Hitch Drop
- Article: Where to Position the Trailer Axle?
James C.
3/15/2024
Trying to find 3.5 inch boat keel roller