Draw-Tite Drawbar Review 36061 Video

The Draw-Tite Max-Frame Trailer Hitch Receiver #76271 will fit and work great for your 2022 Subaru Forester whether you have the base model or the Wilderness. The only thing to keep in mind is that you do need new hardware as hitch hardware is only…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

When a hitch is installed on a 2006 BMW 325i it is usually used as an attachment point for a bike rack or other hitch mounted accessory, instead of for towing purposes. For this reason, Tow Ready or Curt don't have a specific recommended trailer…

Yes, the Draw-Tite Trailer Hitch, #36262, will fit your 1999 Volvo V70R all wheel drive model. I have included a link to the installation instructions below. If you plan on towing with this hitch, I recommend a drawbar, hitch ball, and wiring to…

Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and…

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

We do have the Draw Tite hitch part #76138 that is a confirmed fit for your 2022 Mazda CX-5 and would work great. This is a mostly hidden hitch with great towing capacities. Then for wiring the Tekonsha kit part #118746 is easy to install and also…

The 2014 BMW X1 uses a multiplexed wiring system which means either the vehicle’s brake and tail functions are combined on one wire and the turn functions are on separate wires or the vehicle’s brake, tail and turn functions are combined on one wire.…

I have a different option for you, but there is not a version of the etrailer Spare Tire Carrier #e99045 you were looking at that works with 2" square tubing on your trailer. The closest straight mount carrier is going to be the CE Smith Spare…

We actually have a spare wheel carrier for trailers with angle-iron rails with the etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing #e99045.

The Pollak 5-Pole, Round Pin Trailer Wiring Sockets, item #PK11502, and #PK11501, do not have a standardized wiring configuration. I normally direct my customers to the 6-way wiring configuration, eliminating the middle pin. Start by wiring the top…

Although there are no wiring diagrams available for the #PK11501, when looking at the front of the harness the 12 o'clock pin is the tail lights (brown wire) the 2 o'clock pin is the aux circuit (red), the 5 o'clock pin is the right…