Customers compare C45147 to these similar products
Products Featured in this Video
Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the Curt Starter Towing Kit package. Now this is gonna be for a one and a quarter inch hitch. It's a two-inch ball, with a three quarter inch shank rise. This is gonna be great for towing things such as a kayak carrier, or small utility trailer.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thanks for reaching out, Tommy! The closest thing we have for your 2024 Honda CR-V is the Curt Trailer Hitch Receiver #C12169 which is a Class II hitch receiver. This means it has the same 1-1/4" receiver opening as the Class I but it just…
view full answer...Happy Monday to you as well! I do have a potential solution for you. We do not carry a draw bar with a true 0" rise, but what you can do is use the Curt Class 2 Drawbar #C45503. This has a 3/8" rise, and will be the closest thing we…
view full answer...Your 2022 Hyundai Ioniq PHEV is going to require the T-One Vehicle Wiring Harness #118758. The Curt Harness #C56233 you found is only for the Blue hybrid trim. I currently see the PHEV was only offered for the SE, SEL and Limited trims.
view full answer...I can definitely set the record straight for your 2022 Hyundai Ioniq. I went ahead and called my tech at Horizon Global (the makers of Draw-Tite hitches), and he confirmed that the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit -…
view full answer...The hitch options for the 2017 Hyundai Ioniq are Class I, 1-1/4" inch hitches. There is not a 2 inch receiver available because the Ioniq is not designed to handle the weight capacity of a 2 inch receiver. I recommend Draw-Tite hitch part #24963…
view full answer...According to my research the 2021 and 2022 model years for the Hyundai Ioniq are pretty much identical so both the Curt #C11486 and Draw-Tite #24963 Class I hitches will fit just fine on your 2022 model. We've actually had a few customers install…
view full answer...Sounds like you are trying to determine where the Curt hitch part #C11486 is going to sit when installed relative to the bumper of your vehicle. When we installed this hitch on a similar 2018 Hyundai Ioniq we found that from the center of the hitch…
view full answer...For your 2019 Hyundai Ioniq the hitch I recommend is the Curt part #C11486 to carry your bike rack. This hitch has more than enough capacity for a 2 bike rack like the Thule Camber #TH9058 and was made in the USA so it's a really great option.…
view full answer...The Curt Trailer Hitch item #C23WR and the Draw-Tite Hitch item #DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz. The main differences between the two hitches are that the Curt is made in the USA and the…
view full answer...In most cases it's a bit safer to go on the slightly lower nose height setting instead of slightly higher since higher can sometimes cause sway. But if the vehicle is going to squat quite a bit from the weight of the trailer then the higher would…
view full answer...The Curt Hitch part #C12339 that you referenced is the most popular hitch for your vehicle that we carry.
view full answer...In the video you are referring to the vehicle is a 2003 Toyota Camry and on that model the instructions only call for 3 fasteners on each side of the vehicle. I have included a link to the installation instructions for you to view.
view full answer...