Curt Ball Mounts - Fixed Ball Mount - C45147 Review Video

Thanks for reaching out, Tommy! The closest thing we have for your 2024 Honda CR-V is the Curt Trailer Hitch Receiver #C12169 which is a Class II hitch receiver. This means it has the same 1-1/4" receiver opening as the Class I but it just has a…

Your 2022 Hyundai Ioniq PHEV is going to require the T-One Vehicle Wiring Harness #118758. The Curt Harness #C56233 you found is only for the Blue hybrid trim. I currently see the PHEV was only offered for the SE, SEL and Limited trims.

To determine the length you need measure from the hitch pin hole on your Jeep's trailer hitch receiver out to the edge of the spare tire. Then add an inch or so to give you a little space. Some extenders are only designed to be used to flat tow a…

The hitch part #E-3S that you referenced would not bolt up the bottom of the Westin Bumper part #66000-97200 without a lot of modification that I can't recommend. Instead I have a much better option for you for a hitch for your 1996 Ford Ranger.…

You'll want to use a trailer ball with a 3/4 inch diameter shank. For a 1-7/8 inch ball, use #C40001 and for a 2 inch ball, use #C40018. The coupler on your trailer will have the necessary ball size stamped on it.

According to Curt Manufacturing, installing the Class II Receiver Hitch, part #12012 will NOT require relocation of the spare tire bracket. Although not expressly mentioned in the instructions, temporarily lowering the spare tire can make the install…

The hitch options for the 2017 Hyundai Ioniq are Class I, 1-1/4" inch hitches. There is not a 2 inch receiver available because the Ioniq is not designed to handle the weight capacity of a 2 inch receiver. I recommend Draw-Tite hitch part #24963…

According to my research the 2021 and 2022 model years for the Hyundai Ioniq are pretty much identical so both the Curt #C11486 and Draw-Tite #24963 Class I hitches will fit just fine on your 2022 model. We've actually had a few customers install…

For your 2019 Hyundai Ioniq the hitch I recommend is the Curt part #C11486 to carry your bike rack. This hitch has more than enough capacity for a 2 bike rack like the Thule Camber #TH9058 and was made in the USA so it's a really great option.…

Sounds like you are trying to determine where the Curt hitch part #C11486 is going to sit when installed relative to the bumper of your vehicle. When we installed this hitch on a similar 2018 Hyundai Ioniq we found that from the center of the hitch…

I can definitely set the record straight for your 2022 Hyundai Ioniq. I went ahead and called my tech at Horizon Global (the makers of Draw-Tite hitches), and he confirmed that the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit -…

The Curt Class II Euro Style Drawbar with 1-7/8" Ball #C45591 will fit a 1-1/4 inch trailer hitch receiver and secure to the hitch with Pin and Clip #F-4 but I wouldn't be able to tell you if it will fit a European trailer. It has a 1-7/8…