Review of Roadmaster Replacement Comfort Ride Shock - RM-204000-00 Video

Since you are concerned about dips, RRs, and bumps in curves, I recommend using a shock absorber like #LC283271 or #LC281281 on your 5th wheel trailer. You stated the mounting hardware is already in place, so adding shock absorbers should be easy and…

It is possible that the MORryde Shocking Absorbing Equalizers #MR27ZR and Wet Bolt Kit #MR46ZR you were looking at will fit your 2020 Grand Design Reflection 337RLS, but the only way to be sure will be measuring what is currently installed on your…

We have replacement shackles that are 2-5/8 inches bolt hole center to bolt hole center with the part #115052 but we do not sell these in a kit like you asked about. Then for wet bolts that will work with these that come with matching nuts you'd…

The biggest difference between the 6,000 lbs Dexter Trailer Brake Assembly part #23-106 for right hand and part #23-105 for left hand and the 7,000 lbs Dexter Trailer Brake Assembly part #23-181 for right hand and part #23-180 for left hand is the…

I have a solution for you, but I do not recommend attempting to drill into the spindle to install a zerk fitting. Instead, I recommend using Bearing Buddy Bearing Protectors to help make greasing your trailer axles easier. The Bearing Buddy will…

The only difference between the Dexter 7K hubs and hub and drum assemblies that have either 1/2 inch studs or 9/16 inch studs are the studs themselves. Otherwise they are exactly the same. You can use calipers such as #PTW80157 to measure the…

The most common bearings and seals for a 7,000 pound axle are #25580 inner bearing, #14125A outer bearing, #25520 inner race and #14276 outer race. The grease seal can vary, and will usually either be the #GS-2250DL, which has a 2.250 inch inner…

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

Because they are maintenance free, less expensive and easier to install than shocks, I'd definitely recommend going with the SumoSpring option. They'll work with your existing leaf spring suspension to help dampen the suspension, but will…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

We have a couple of subwoofers available that are going to improve the sound, and we have options for both indoor and outdoor. - Outdoor: Jensen Enclosed Amplified Marine Subwoofer - Surface Mount #JMPSW800 - Indoor: Furrion Indoor Enclosed Amplified…

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…