Lionshead Trailer Wheel Center Cap Review Video

To measure the pilot hole on your wheel, you will need to remove the cap in the picture and then measure the inside diameter of the hole in the wheel. Most wheels with the bolt pattern you have in the photo are 4.88 inches or 4.9 inches with a…

Hey Bernard, the hitch ball that comes with the Equal-i-zer #EQ37140ET does not come pre-installed onto the head of the system.

The Kenda Karrier ST205/75R15 Radial Tire w/ 15" Series T02 Aluminum Wheel #AM39053 will come mounted and balanced. You will simply need install them on your trailer and double check the air pressure to ensure they are at their max psi…

You are correct, this is actually a fairly common occurrence and a known issue for the newer Ford trucks and their factory TBC not working with Dexter EOH brakes. Ford did have a recall for almost 400,000 trucks with this issue and they discovered it…

The Snap-In Plug #LHSI60C that you referenced is indeed designed to fit certain Lionshead Center Caps but it will still work as a replacement on other brand caps as long as the dimensions match. The best way to determine if this will fit your…

I spoke with my contact at EZ-Jack and he says that to use the EZ-Jack on a triple axle trailer you will need to turn the curve up, opposite the wheel, and drive up on the jack and you will be able to change the tires. Other wise a floor jack and…

Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…

The 18 inch long Equal-i-zer weight distribution shank part #EQ90-02-4600 does give most trucks and trailers the ability to tow with the tailgate down like it sounds like you are planning on doing and like what you see in the attached picture. Now…

Your center hole measurement of 4 13/16" converts to 4.81" in decimal form. The Trailer Wheel Center Cap, Chrome, 4.82" Pilot Size, part #482EZ, should work. This center cap works with front and rear wheels. I have included a product…

The best option we are going to have that will give you the higher weight capacities on a nicer looking aluminum wheel is going to be for you to move to a 15 inch wheel and tire combo like the part #AM39053. This has the same 5 bolt pattern and a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The procedure for lubricating the hitch head is pretty simple. Place a pea-sized dollop of multi-purpose or bearing grease on the underside of the ball platform right next to the sockets. You'll also want to do the same thing on the under side of…