Replacement Lippert Correct Track Weld-On Axle Hanger - Qty 1
(29 reviews)
Price: $42.29
In Stock
Replacement Lippert Correct Track Weld-On Axle Hanger - Qty 1
Item # LC303918
Retail:$45.60
Our Price: $42.29
You Save: 7%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC303918
- Trailer Suspension Parts
- Axle Hanger
- Lippert
Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer.
Features:
- Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer
- Made in the USA
Specs:
- Overall height: 5"
- Overall width: 3-1/2"
- Depth: 3-1/4"
- Distance between mounting holes: 1-3/4" center on center
- Quantity: 1 hanger
303918 Replacement Lippert Components OEM Correct Track Weld-On Axle Hanger - Qty 1
Video of Replacement Lippert Correct Track Weld-On Axle Hanger - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Components Trailer Leaf Spring Suspension - LC303918
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this replacement Lippert Components correct track weld-on axle hanger. It's for a quantity of one. Now, this part will replace the correct track axle hanger that was welded to the frame of your vehicle by the manufacturer. This is a steel construction.
It is for a quantity of one hanger, and just want to give you some measurements on this. Overall height of this, it's going to be about five inches tall. The width this way is about three and a half inches. To do it this way is about three and a quarter inches, and there's two mounting holes right here at the top. Center to center on those is about one and three quarter inches.
But that should do it for the review on the replacement Lippert Components correct track weld-on axle hanger for a quantity of one.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
Replacement Lippert Correct Track Weld-On Axle Hanger - Qty 1 - LC303918
Average Customer Rating: 4.9 out of 5 stars (29 Customer Reviews)
Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer.by: Scott10/24/2023
Exactly what I needed to replace a broken hanger. The extra cost for 3day delivery was very reasonable and ETrailer was able to ship the same day the bracket was ordered.
by: Patrick 02/17/2024
Great customer service. Always happy with etrailer.
by: Chuck 05/16/2024
Exact part I needed,
Quick delivery
by: Bob 04/03/2023
Correct hangers at a good price. With the stock hangers breaking, I wanted to have these for spares. Quick shipping, with updates along the way.
by: Mark 04/13/2023
Better than the first one had to have a professional person to do the job he can weld better than me I have been a technician for 47 years this is the first time I have ever to do this and I owned fifth wheel for many years since 1990 and this is my fifth one thank you
by: Joe 09/16/2023
Called customer service and got info on the correct part. Service person was very helpful. I ordered part and was recieved in three day
Excellent
by: Joe S10/28/2023
Great service
by: Joseph 10/04/2023
Fast service
by: Doug07/12/2023
Great Products
by: Les 05/12/2023
Delivery was on time and not damaged, thank you
by: William 04/18/2023
Looks to be heavier material then the o riginal.
by: William 01/18/2023
Perfect. Manufacturer said they were not available
by: James 11/09/2021
Perfect replacement
by: Michael08/07/2022
Bought due to being unavailable in the future but haven't used yet.
by: Bryan 09/27/2022
Worked perfectly arrived on time
by: Jeffery08/19/2022
by: Michael 02/12/2024
by: Ryan 02/02/2024
by: Edgar 05/21/2024
by: Robert 05/06/2024
by: Hector 10/21/2023
by: Daron08/25/2023
by: Marshall 07/23/2023
by: Alan 05/21/2021
by: John 05/15/2023
25
29
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- What Width Leaf Spring Does Correct Track Hanger # LC303918 FitThe Lippert Correct Track Hanger part # LC303918 was designed to be used with leaf springs that are 1-3/4 inches wide like you have. You would not need to use a spacer with your 1-3/4 inch wide springs.
view full answer... - Replacement Correct Track Hanger That is 5 Inches TallAppreciate the photo it was very helpful; and since your hanger is 5 inches tall, you do indeed have the right Correct Track hanger replacement, which is the following part number: - Replacement Lippert Correct Track Weld-On Axle Hanger # LC303918
view full answer...
- Replacement Suspension Hanger For Correct Track Suspension On 2018 Heartland Road Warrior Toy HaulerFor your 2018 Heartland Road Warrior Toy Hauler you will need a Correct Track Replacement Hanger. We have them 4" Tall # LC303917 or 5" Tall # LC303918.
view full answer... - Availability of Front Leaf Spring Hanger for 2 inch Wide SpringsWe have a front leaf spring hanger that was designed for 2 inch wide slipper springs with the part # 721584.
view full answer...
- What are the Dimensions of the Lippert Components Correct Track Weld-On Axle HangerYes of course. The Replacement Lippert Components Correct Track Weld-On Axle Hanger part # LC303918 you mentioned is 5" tall x 3-1/2" wide x 3-1/4" deep and the two mounting holes on the top are 1-3/4" apart on center as shown in the included diagram. I included a video of the # LC303918 for you to take a look at.
view full answer...
- Does The Lippert Axle Hanger # LC303918 Come With A Slot And Single Hole For The Bolt Hey Pablo, The Replacement Lippert Correct Track Weld-On Axle Hanger # LC303918 only comes with slots because it's designed to work with the Correct Track system. What you have is likely OEM only so an exact match would need to be purchased directly from the trailer manufacturer if you wanted to have both the slot and single hole.
view full answer... - Correct Track Spring HangersThe hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts to be required. These spring hangers are designed specifically for the Correct Track System as replacements for damaged parts. Hanger # LC303918 is 5" tall. Hanger # LC303917 is 4" tall. If you are looking to change a suspension system to the Correct Track, their product line has been discontinued. I hope this...
view full answer... - What is Purpose of Yellow Octagon Washers of Correct Track Alignment SystemThe hole in the yellow octagon is offset from the center which when installed in the slotted hanger like the part # LC303918 gives you the ability to set an exact alignment with the other sides hanger but using the same configuration by simply rotating them. If you went to a hanger that just had a single hole you would not need to use the yellow octagons.
view full answer...
- How Does Replacement Lippert Correct Track Weld-On Axle Hanger # LC303918 InstallYou would need to have the Replacement Lippert Correct Track Weld-On Axle Hanger # LC303918 welded to your trailer frame but do not need to have it bolted on.
view full answer... - Dimensions of Replacement Lippert Components Correct Track HangerI can confirm that the correct part for you is the Replacement Lippert Components Correct Track Weld-On Axle Hanger # LC303918. When I reached out to Lippert they told me this hanger measured exactly 4.93 inches long x 3 inches wide x 3.3 inches.
view full answer... - Lifting A 2014 Grand Design Reflection Fifth WheelThe Replacement Lippert Correct Track Weld-On Axle Hanger, part # LC303918, has raised edges to fit the octagon cam. Since this hanger cannot sit flush against the axle the Correct Track Trailer Alignment and Lift Kit - Tandem Axle, part # RR23QX, is not compatible. You have two options to raise your 2014 Grand Design Reflection Fifth Wheel. You can replace your Correct Track hangers on your 2014 Grand Design Reflection Fifth Wheel with taller hangers to get the rise you need. If your...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Ryan F
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
8/31/2022
It looks like you didnt have a great experience with etrailer. If there is anything I can do, I would be happy to assist you.