Replacement Rollers For Wobble Rollers To Eliminate Marks and Gauging In The Boat Hull
Question:
Hello, I am wanting to take away these wobble rollers and add some bunks under the hull. Will these double slotted bunk brackets be ok in the section I have identified where I want to make them? Boat weighs about 5100 empty plus fuel and gear. Rear wobble rollers will still be in place for awhile supporting the rear of the boat. Just tired of the current wobble rollers up front leaving marks and gauging fiberglass. Thanks!
asked by: Dave J
Expert Reply:
Since your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and more durable than traditional rubber while being softer and more pliant than polyurethane. You will need to find your shaft size to find the correct 5" Rollers. If you have a different size roller let me know what size it is and I can help you find the correct rollers.
5/8" Shaft # YR500YW-5P
3/4" Shaft # YR500YW-6P
7/8" Shaft # YR500YW-7P
1" Shaft # YR500YW-8P
1-1/8" Shaft # YR500YW-9P
1-1/4" Shaft # YA72FR
If you rather go to the Bunk Boards # CE27845 you will need to determine the correct height for the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies.
9-1/4" Tall Bracket # CE10190GA-4
10-1/4" Tall Bracket # CE10191GA-4
12-1/4" Tall Bracket # CE10192GA-4
16-1/4" Tall Bracket # CE10196G-4
The CE Smith U-Bolts # CE15283GA-8 are needed to attach the brackets to a 3" tall crossmember.
Products Referenced in This Question
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 9-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 2 Inch Tall
- 8-3/4 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 10-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 2 Inch Tall
- 9-3/4 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 11-3/4 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 15 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 8
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 84 Inch Long
- CE Smith
more information >
Yates Ribbed Wobble Roller for Load Rite Boat Trailers - TPR - 5" Diameter - 1-1/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/4 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 3/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 3/4 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 7/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 7/8 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/8 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 3/4" Shaft
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE29536
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10404G Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1" Shaft
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 12"
- Shop: CE Smith Ribbed Wobble Roller for Boat Trailers - PVC - 4" Diameter - 3/4" Shaft - Amber
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR440R Review
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR500YW-7P Review
- Search Results: wobble
- Search Results: yates wobble roller
- Search Results: keel roller
- Search Results: bunk brackets
- Q&A: Replacement Bunk Brackets for Older Grady White Seafarer Boat Trailer
- Q&A: Is it Advisable to Change Diameter of Wobble Rollers
- Q&A: Wobble Roller Recommendation for a Boat Trailer that Fits 7/8 inch Roller Shaft
- Q&A: Can a Ribbed Wobble Roller be Used in Place of a Regular Wobble Roller on a Boat Trailer
- Q&A: Replacement 4-3/8 by 3 Inch Wobble Rollers for a Boat Trailer
- Q&A: Will New Wobble Rollers Leave Black Marks on Boat Hull
- Q&A: Difference Between Rocker-Rollers and Wobble Rollers for Boat Trailer
- Video: CE Smith Boat Trailer Carpeted Bunk Boards Review and Installation
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE15283GA Review
- Search Results: bunk boards
- Search Results: ce10000g
- Search Results: yates 530r
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Choose the Right Trailer Hitch Class