Draw-Tite Ball Mounts - Fixed Ball Mount - 36065 Review Video

Appreciate that info and we can go ahead and get you all the parts you need, including the ball mount, to tow the U-Haul trailer with your 2011 Hyundai Sonata non-hybrid. I'll go ahead and list them for you below: - Curt Trailer Hitch…

Yes, to install the Curt Class-I trailer hitch #C11025 you referenced, you will need to remove the heat shield during installation and modify it when reinstalling. When pushing the heat shield back into place, you will most likely need to modify or…

We do indeed offer replacement installation hardware. To order, use part #RHK. On the product page, type the hitch item number, #C11025 into the provided field, and choose "Curt" from the drop down menu, as shown in the diagram. If you…

I checked with Curt and the 2015 Hyundai Sonata takes a different trailer hitch than the 2011 models. If you want to stick with the Curt brand the hitch for the 2015 model is #C11402. If you are using the hitch for towing both vehicles/hitches do use…

The heat shield should not have to be trimmed with the Curt hitch. You may need to elongate a mounting slot on the heat shield at most. For a Draw-Tite or Hidden Hitch trailer hitch, heat shield modification is needed and I have included a link to a…

For your 2014 Ford Focus ST hatchback the trailer wiring kit part #118549 has been confirmed as a fit and would work well. I attached an install video for you to check out as well.

Since the Curt Hitch part #C11431 will mount underneath the center exhaust on your 2014 Ford Focus ST Hatch the ground clearance will be reduced. Since we haven't had that chance to install this hitch on a vehicle like yours we don't have an…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the Draw-Tite Sportframe Trailer Hitch Receiver #24865 as it is the easier of the two hitches we have for installation on your 2012 Ford Fusion. Both are also class I receiver and will be able to tow a small trailer with a small…

The distance from the center of the pin hole to the end of the shank that slides into the hitch is 1-7/8 inches.

To determine the rise/drop you need, you'll need to determine the height difference between your receiver and the trailer coupler. I've linked you to an FAQ article that shows how to do this. I've linked you to the Euro Style ball mounts…