Trailer Hitch and Wiring for a 2015 Hyundai Sonata

Question

Question:

bought this hitch for my 2011 sonata, will it fit a 2015 sonata that i just purchased hate to have to buy another hitch/

asked by: Bob

0

Expert Reply:

I checked with Curt and the 2015 Hyundai Sonata takes a different trailer hitch than the 2011 models. If you want to stick with the Curt brand the hitch for the 2015 model is # C11402.

If you are using the hitch for towing both vehicles/hitches do use the same ball mount, # C45521, as well as 1-7/8 inch ball # 19256 and 2 inch ball # 19258. For trailer wiring, if your 2015 is NOT a hybrid use # C56247. If it is a hybrid use # HM11143874.

If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.

Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or car go carrier) per their warranty requirements.

expert reply by: Michael H

0

Answer 1

I have a different idea all together, but I looked up the Rollator RJ4405R you mentioned ad found it measures in at 29-1/2" x 29-1/2" x 23-1/2" so a capable carrier would be the #FHG77ZR but there is not a way to use it…

view full answer...

Answer 2

Yes, to install the Curt Class-I trailer hitch #C11025 you referenced, you will need to remove the heat shield during installation and modify it when reinstalling. When pushing the heat shield back into place, you will most likely need to modify or…

view full answer...

Answer 3

The Draw-Tite and Hidden Hitch are basically the same design and one would not be less conspicuous than the other behind your Sonata. The only real difference in these two hitches is that the ball mount, pin and clip are provided with the Hidden…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Trailer Hitch and Wiring for a 2015 Hyundai Sonata

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching