Erickson Re-Tractable Ratchet Straps Review Video

The closest match we have to the 1.97 inch measurement you took on your hub bore is with the Bearing Buddy Bearing Protectors #BB1968SS. These are designed for 1.968 inch hub bores so they should work well on your trailer. The .002 inch difference is…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

I do recommend using a brake hand winch for a boat trailer. The Single-Speed Boat Trailer Winch part #315-W2000D is a great cost effective option with included strap and brake. It also has a neutral freewheel so you can let line out without the…

I spoke with my contact at Dutton-Lainson regarding your Hand Winch #DL15303. On this particular unit the handle can in fact be reversed (to be on the left side instead of the right). In order to do this, you will basically need to take apart the…

I spoke to my contact at Dutton-Lainson and he informed me that reversible ratchet means that you can reverse the direction you have control of, but you will need to remove the ratchet assembly and reinstall it in the opposite direction to do so. I…

The length of the base of the Dutton Lainson Winch part #DL14521 that you referenced is 5-3/16 inches, the width of the base is 3-5/16 inches and the overall height is 4-1/32 inches.

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

I do have an option for you but we do not have a trailer coupler repair kit for your Fulmer/Fultun trailer coupler. I know these kits are convenient and cost saving but the fact of the matter is that they are not universal and will only work on very…

Yes, you can replace your weld-on coupler with a bolt-on. You'll just need to drill the holes. Then, if you wanted to go back to a weld-on later that would be fine too. Just to confirm you can check with the trailer's manufacturer that…

The Demco A-Frame Trailer Coupler #DM14793-81 (Black) or #DM14793-52 (Silver) do not come with bolts. You will need to use 1/2" Grade 5 hex bolts with them. I've added links to video reviews of each coupler for you to check out.

We have a trailer hub assembly that may work well for you. It is the CE Smith Trailer Hub Assembly, part #CE13100. This hub is designed for 2,500-lb axles and has a 4 on 4 bolt pattern. It is threaded for the wheel bolts and not the nuts as you…