Customers compare 36065 to these similar products
Products Featured in this Video
Hi there light haulers. Today we're going to be taking a look at Draw-Tite's one and a quarter inch drawbar with a five inch rise. This drawbar is going to be great for your class two applications where you have a one and a quarter inch receiver. It's a solid steel shank on our drawbar. This is going to give it some extra durability. It does offer a 300 pound tongue weight, which is the force… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Appreciate that info and we can go ahead and get you all the parts you need, including the ball mount, to tow the U-Haul trailer with your 2011 Hyundai Sonata non-hybrid. I'll go ahead and list them for you below: - Curt Trailer Hitch Receiver…
view full answer...We do indeed offer replacement installation hardware. To order, use part #RHK. On the product page, type the hitch item number, #C11025 into the provided field, and choose "Curt" from the drop down menu, as shown in the diagram. If you…
view full answer...I checked with Curt and the 2015 Hyundai Sonata takes a different trailer hitch than the 2011 models. If you want to stick with the Curt brand the hitch for the 2015 model is #C11402. If you are using the hitch for towing both vehicles/hitches do use…
view full answer...The heat shield should not have to be trimmed with the Curt hitch. You may need to elongate a mounting slot on the heat shield at most. For a Draw-Tite or Hidden Hitch trailer hitch, heat shield modification is needed and I have included a link to a…
view full answer...Yes, to install the Curt Class-I trailer hitch #C11025 you referenced, you will need to remove the heat shield during installation and modify it when reinstalling. When pushing the heat shield back into place, you will most likely need to modify or…
view full answer...For your 2014 Ford Focus ST hatchback the trailer wiring kit part #118549 has been confirmed as a fit and would work well. I attached an install video for you to check out as well.
view full answer...When installing the Curt Trailer Hitch, part #C12005, the top of the receiver tube is 1-3/8 inches from the mounting holes the trailer hitch is attached to. I have attached a page from the installation instructions you can check out that shows where…
view full answer...Since the Curt Hitch part #C11431 will mount underneath the center exhaust on your 2014 Ford Focus ST Hatch the ground clearance will be reduced. Since we haven't had that chance to install this hitch on a vehicle like yours we don't have an…
view full answer...Yes, we do. I recommend Curt, part #C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out.…
view full answer...I'll just rip this band-aid off as fast as I can but there is just not a way to use a standard hitch-mounted bike rack and tow at the same time with your 2006 Toyota Matrix XR. The issue, like you said, is the 1-1/4 inch hitch not having an…
view full answer...This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…
view full answer...Between the Yakima HoldUp 2, part #Y02443 and the Sherpa 2.0, part #SH22G, I personally like both, however, they are built around different bikes and uses. The Yakima HoldUp is a better rack if you have kids bikes, heavier bikes, or could possibly…
view full answer...