Review of CURT Trailer Hitch Ball Mount - Class II Euro Style Fixed Ball Mount - C45591 Video

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

The distance from the center of the pin hole to the end of the shank that slides into the hitch is 1-7/8 inches.

The recommended 2 inch Euro style ball mount for Curt trailer hitch #C11352 on a 2015 Nissan Altima is #C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you are…

The hitch drawbar or ball mount is the part that slides into the hitch receiver that has the trailer ball bolted to it. You'll need the ball mount if you plan on towing, but if you're only using the hitch as a mount for a hitch mounted…

To determine the rise/drop you need, you'll need to determine the height difference between your receiver and the trailer coupler. I've linked you to an FAQ article that shows how to do this. I've linked you to the Euro Style ball mounts…

The Euro style ball mount like the #C45562 that you referenced is only available for the smaller 1-1/4 inch hitch size so best option would be a standard ball mount with same 3 inches of rise like the part #2753 and then for a 2 inch hitch ball…

Honda doesn't offer an official roof weight capacity for the 2020 Honda Fit even in their owner's manuals. They do not offer factory roof racks since they do not believe the Fit is designed to carry weight. They do say that the total load…

The drawbar you mentioned is not intended to be used in the rise position and would only create a 3-1/2 inch rise. We do carry a 5 inch and a 3-1/8 inch rise drawbar (see links below) that will fit the Class II hitch. These drawbars all have a tongue…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…