Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC8 Review Video

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

I'd recommend going with the #EM34423 instead as it's closer to the length you need as it is 5-1/2 feet long and it has a higher capacity at 1,333 lbs working load limit and 4,000 lbs break strength. The ratchet portion could easily be…

I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…

In regards to ball mounts such as the Flash Solid Steel Adjustable 2-Ball Mount #FA49-00-5900, rise is the distance from the top of the shank to the top of the ball mount platform when oriented for rise (please see accompanying photos). The Flash…

I went out to the warehouse and measured from the top of the shank to the lowest point of the ball mount #LTB10-2 and it measures about 15-3/4 inches.

On the Convert-a-Ball cushioned ball mount #AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show…

I looked up the differences between the 2019 Toyota RAV4 Hybrid Limited models and the Adventure model like the one we installed the Curt hitch part #C13416 and Draw Tite #DT82QR and there isn't a height difference so you'd have the same…

Since the Curt Hi Rise Hitch ball part #C40034 is designed for a 1 inch diameter hitch ball hole you'd need the hitch ball bushing part #58184 to use it with the Curt ball mount #C45338 that you have.

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

The etrailer Trailer Hitch Receiver #e23ZR and Curt #C13416 you were looking at for your 2019 Toyota RAV4 are very similar in the fact that they both have the same ground clearance of roughly 10", and the same capacities at 600lbs tongue weight…

In regards to the Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4, the hitch pin hole is about 5" behind the rear bumper. The distance to the hitch ball would be dependent on the length of the ball mount. I am…

Yes. The Curt #C13416 has been confirmed as a fit for the 2021 Toyota RAV4. This is a Class III hitch with a 2" receiver that has a concealed cross tube, so you'll have a bit less worry about bottoming out and dragging the hitch when going…