Total Height of Fast Way Hitch Ball Mount with 10 Inch

Question

Question:

how tall is it from the top of the shank to the bottom of the bottom ball with it set in the most dropped position? i want to know how much ground clearance im going to lose.

asked by: Paula

0

Expert Reply:

I went out to the warehouse and measured from the top of the shank to the lowest point of the ball mount # LTB10-2 and it measures about 15-3/4 inches.

expert reply by: Charles S

0

click to enlarge

Answer 1

I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…

view full answer...

Answer 2

In regards to ball mounts such as the Flash Solid Steel Adjustable 2-Ball Mount #FA49-00-5900, rise is the distance from the top of the shank to the top of the ball mount platform when oriented for rise (please see accompanying photos). The Flash…

view full answer...

Answer 3

A 9 inch lift on a truck like your 2016 Chevy Silverado that already sits pretty high is going to most likely require quite a bit of drop from a ball mount. The Flash Solid Steel Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Total Height of Fast Way Hitch Ball Mount with 10 Inch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching