Optronics Trailer Lights - Tail Lights - STL87RCB Review Video

From the center of the holes on the vertical adjustment bracket of the Demco part #DM13867-52 to the end of the channel on opposite end measures 11-1/2 inches.

We have a couple of options for vertical trailer tail lights that are 16". I have listed them below. These are our only options for 16" long LED tail lights. 16" x 1-5/16" x 11/16" - Optronics ThinLine LED…

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of…

I recommend you select a toy hauler type storage cover. I suggest the Adco SFS AquaShed RV Cover for Toy Hauler Travel Trailer, #290-52273. This has actual dimensions of 342" long x 106" wide x 120" tall.

We do not carry and clear lens with white LED in that #AL91CAB size. You may want to consider instead using the Optronics Sealed LED Utility Light - 2 Diodes - Clear #UCL13CPG or the Thinline Sealed LED Utility Light - Clear - 6 Diode #UCL65CB as…

Being a Kalamazoo/Portage native, I understand the cold and windy Michigan winters you are concerned about. I recommend the Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 18' Long #290-46005 for your V-nose cargo trailer. This cover…

The only difference between the Optronics ThinLine LED Trailer Tail Light part #STL87RCB and part #STL87RCPG is that the latter has bullet style (removable) connectors and the former has bare wire ends.

The Optronics ThinLine LED Trailer Tail Light part #STL87RCB is a tail light but if you were instead installing the light to act as a marker light which would be its intended purpose if installed in the center of the trailer then you'd simply…

You are correct. With a 3 terminal solenoid like the #PK5231201, the mounting hardware will serve as the ground connection. A 4 terminal solenoid like the #PK5232401 will require a dedicated ground wire from that additional terminal for this…

Both the Optronics lights you referenced, parts #STL59RCB and #STL59RB, are thin-line 9-diode LED light strips that directly surface mount without need for a mounting bracket or bezel. Each light has two mounting holes built in to the housing; these…

I went out to the warehouse to take a look at the Curt Extender #C45796 referenced in your question. I measured a distance of right at 3-1/8 inches from the center of the hitch pin hole to where the larger 2 inch shank begins. I have included an…

The Curt Extender for 2" Receivers part #C45796 can be used for towing but they do reduce your weight capacity but 50%. If you give me more info on what you are trying to do I may have other options for you but I typically recommend using a ball…