Curt Ball Mounts - Fixed Ball Mount - C45448 Review Video

It sounds like you're looking for a completely solid shank ball mount for a 2" hitch that also has an 8" drop; I am not aware of anything like this being on the market since there are some challenges with manufacturing a solid ball…

Since the Curt Hi Rise Hitch ball part #C40034 is designed for a 1 inch diameter hitch ball hole you'd need the hitch ball bushing part #58184 to use it with the Curt ball mount #C45338 that you have.

Brophy hitch ball #SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, #903B. I have linked a video review of this set for you.

If you put on a Hitch Extender #HE06 you will reduce your trailering capacity to 350lbs tongue weight and 3,500 total trailer weight. Most of the receiver extensions with that much rise include a gusset for strength that may prevent the Curt Clamp-On…

You are correct about ball mount #EA80. The ball platform is indeed 1 inch thick. The 2 inch ball #63852 does not have a long enough shank to be used with this ball mount. You will need a 2 inch ball with a long shank such as #63849. It isn't…

Any time you are not sure what rise or drop you might need to tow a trailer level it is a good idea to use an adjustable ball mount. The same goes for the ball size needed though most trailers in the sizes you are looking at will have a 2-5/16 inch…

WeatherTech does have mudflaps that fit your 2023 Chevy Suburban RST with the part #WT73XJ which is a front and back set. This set fits the versions of your vehicle that do not have the power assist retractable steps whereas the part #WT32TJ is for…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

A simple set of suspension enhancements should help tremendously with bounce while towing with a 2021 Ford Ranger. I recommend the SumoSprings Solo Custom Helper Springs part #SS76MR which provides a bit of cushion as well as support without…

For a 2-inch ball mount rated for 12,000-lbs that has 8-inches of drop we offer two options you can see on the linked page. Part #4283 from Draw-Tite provides 7-inches of rise or 8-inches of drop, as does Curt #C45448. Both take a hitch ball, sold…

I assume you are asking about the height of the trailer with wheels removed when storing the Yakima Rack and Roll Trailer, part #Y08107. I took a couple measurements of the trailer for you. The arm that holds the shock can be swiveled up when the…

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…