Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC4HD Review Video

The Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball - 1-1/4" Diameter Shank #C29FR will not work with the Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs #AMSC2 which has a 1 inch diameter ball…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

The Curt Class III Trailer Hitch Receiver #13138 is certainly the hitch I recommend for your 2004 Ford Ranger so that the spare tire can remain stored under the vehicle. To choose the correct ball mount for your truck and trailer, it is best to…

For your 2022 Toyota Tacoma I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56349. This 4-pole flat trailer wiring harness has custom-fit connectors that plug into your vehicle's wiring harness, which…

We do have some anti-rattle locking pins that will fit the Convert-A-Ball Cushioned Ball Mount #AMSC4, but the Lets Go Aero Anti-Rattle Device and Lock #63232 is not compatible as it needs a hollow shank to fit properly. You can purchase separate…

Yes, on a ball mount that can be used in both the rise or drop position such as #AMSC4 that you referenced, the capacity remains the same. For this ball mount it is rated for 10,000 pounds gross trailer weight and 2,000 pounds tongue weight. I have…

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

Basically they are the same connector with just a slightly different part number. We carry the part #HM40975 and if you ordered the 40974 from someone else (not recommended haha) you'd get the same thing which just a different part number on the…

Brophy hitch ball #SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, #903B. I have linked a video review of this set for you.