Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp 2 Inch Hitch Receiver - GY88XR Video

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and…

That is a keen observation and a good question. I actually had the chance to assist with assembly of one of the Flint Hill Goods 30" x 50" Wheelchair Carriers #FHG99ZR not too long ago. The main bolt for the shank is indeed quite…

I do have a solution for you, however the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers #63080 is specifically designed to work with Draw-Tite 2" x 2" trailer hitch receivers. Because the collars on…

Yes Tracy, the Curt Rockerball part #C40047 does fit the Curt aluminum ball mount part #C45293 that you referenced.

It is very unlikely that the hitch pin hole on your Draw-Tite Trailer Hitch Receiver is worn causing the ball mount to slide back and forth. There is usually a little bit of play in the receiver tube opening with a ball mount and this can easily be…

HappiJac hasn't really developed a great solution for licking their turnbuckles yet. There are some options, but it also depends on what HappiJac turnbuckles that you have. If you have the HappiJac Qwik-Load Turnbuckles #LC182895, you would just…

The ride on the back of a trailer is very rough due to the extended distance from the axle so a lot of hitch mounted accessories like the Flint Hill Goods 30x50 Wheelchair Carrier part #FHG99ZR are not rated for this. Instead, I recommend using the…

The Pin Locks #TLS9500 are designed to work with TorkLift FastGun and Derringer turnbuckles. I called my contact at TorkLift and asked if they were compatible and they said they have not tested them with the Happijac turnbuckles. They told me the pin…

It is not extremely uncommon for the hitch pin hole on a trailer hitch receiver to become oblong after frequent usage. This is usually attributed to frequent back and forth movement of the shank inside the receiver tube opening that in time will…

Yes, anytime you extend the connection point of a tow bar like the Blue Ox Avail part #BX7420 with a high-low adapter or dual hitch adapter you will need to extend the safety cables. For this, I recommend the Demco Safety Cable Extensions part…

The Timbren Trailer Suspension Enhancement System #TTRA1702 is 2-3/4" tall with no load on the spring. This particular system is designed to mount to the frame with the included bracket(see image) and when the suspension compresses the axle will…

The shortest 2 inch hitch extender we have is the part #HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.