Curt Stainless Steel 2 Inch Hitch Ball Review Video

It truly depends on the tongue weight rating of the weight distribution hitch that you have to know for sure. However, given large difference in gross towing weight capacities, the 10k weight distribution hitch most likely has a tongue weight range…

The longest shank hitch ball we have that is stainless, has a 2 inch ball, and a shank diameter of 1-1/4 inches is the part #C69FR which has a shank length of 2-5/8 inches.

I went out to the warehouse and pulled the Draw-Tite Ball Mount #40332 and took some measurements for you. The dimension from the center of the ball hole to the upturn of the arm is 2-1/8 inches. The second measurement, from the upturn to the top of…

Out of our available locking hitch pins, the etrailer, Roadmaster, InfiniteRule, Demco, and Blue Ox locks are made in the USA. Assuming you have a 2" hitch I recommend the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush -…

The Curt Rebellion XC cushioned ball mount part #C83WR would cushion the ride quality and reduce the movement you are experiencing but an easier and most cost effective solution would be an anti-rattle device like the etrailer #e99007 which will lock…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

I spoke to a tech over at Curt and they confirmed the ball platform on their #C24WR is right at an inch thick. If you were looking for a ball to go with this, the Brophy #EH68C-C will be an 8,000 pound 2 inch ball option, and the Curt #C40007 will be…

No. While Curt is an American company and manufactures a great deal of their products in the U.S.A., the Heavy Duty Forged Ball Mounts like the #C45340 is not one of those products. If you're looking for a ball mount that is made in the U.S.A.,…

With a height difference of just 1-3/4" between the front and rear on your trailer you're awfully close to where you want to be with the Equal-i-zer Weight Distribution System #EQ37120ET installed, as a difference of 1-1/4" or less is…

The Curt #C45312 and the B&W #BWBMHD30011 ball mount are wholly manufactured in the USA. Both ball mounts feature a 2 inch drop or a 1 inch rise if inverted. The B&W has a 16K capacity, with the Curt model having a 12K capacity. Both are…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

Longer ball mounts are helpful for creating clearance from the rear of the vehicle to allow you to lower your tailgate while towing and not interfere with a tongue mounted jack or install hitch mounted accessories (like bike racks) that may require…