Review of CURT Trailer Hitch Ball Mount - Adjustable Pintle Ball Combo Mount - C45908 Video

Yes, it will! The Curt Pintle Hook with 2-5/16" Ball item #C45908 will easily connect to your portable silo's lunette ring and allow you to safely tow it. This ball mount fits a 2-1/2" hitch receiver, includes a…

The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get…

When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to…

There is pretty much a standard for channel mount couplers such as #DM12113-95. The channel width is usually 3 inches and the couplers are usually around 2-7/8 inches wide to fit in the 3 inch wide channel. Once torqued down there is no side to side…

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…

Sure will! 2-1/2" shank ball mounts like the Curt Ball Mount #C79NR you mentioned are made to a standard size allowing them to be installed in all trailer hitches that are 2-1/2". You'll have zero issues using it in the Draw-Tite…

Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…

The Lock N Roll Articulating Coupler #336TS504 is listed as a weld-on application because it doesn't have bolt holes and was left unfinished to make the welding job easier. If you were willing to drill holes in the coupler you certainly could…

Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook #BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application. This is a nice, solid piece of towing gear that I recommend…

Because your F250 is not a long bed model, I would highly recommend you go with the Reese Elite Series w/ Slider, part #RP30144. Although the current trailer you are looking at has a v-type nose on it that might work okay with the #RP30921 and have…

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…