Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255808 Review Video

The pin of the Brophy Pintle Hook #BR27FR can not lock the hook in the open position. Is there a reason you'd want ability to do this?

I have an answer for you. Unfortunately, I confirmed with Air Lift that the Replacement Air Spring for Air Lift LoadLifter 7500 XL System #AL50236 has different mounting brackets than the 5000 models. In order to have the correct brackets as well…

The Buyer's Products plate mount hitch, part #33710052, has the standard 1-3/4 by 3-3/8 inch bolt pattern for mounting to a plate. I've linked our selection of mounting plates for you as well.

Can you verify the diameter of the spindle where the seals ride too? If that diameter is 1.24 inches combined with your bearings both having inner diameters of 1 inch we would have hubs that would fit. The part #8-258BTUC1 would give you a 5 on…

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

The tallest Leaf Spring Hanger Kit we offer is the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center #APT4 which uses 3-1/4" tall front and rear hangers, and 5-7/16" center hangers. The…

As long as you are not exceeding the 85 amps at 12 volts per diode max load then you can definitely use the configuration in your diagram. I spoke with my contact at Roadmaster who said that the connections are not watertight but the internal…

The main slotted hex nut on the Buyers Products 50 Ton Heavy-Duty Swivel Type Pintle Hook #337BP880 is 2-1/4"-4-1/2.

Best solution we have would be a weld on hitch tube like the part #337RT255808 which is the correct 2-1/2 inch hitch size. You'd need to have this welded onto your trailer frame in a location that makes sense but we don't have a custom…

We do indeed have shorter 2-1/2 inch combo bars available than the 18 inch long #C49511 that you referenced. For a 12-inch-long bar you can use part #337RT255812 or for an even shorter 8-inch bar you can use #337RT255808. I have attached a couple…

The Buyers Products Plain Receiver Tube 2-1/2" I.D. x 8" Long #337RT255808 has an inner diameter of 2-1/2" so it will fit that size of steel tubing without issue assuming that the shapes are the same.

While the Draw Tite hitch reducer part #58550 doesn't have a specified weight rating it would easily handle towing a 30 foot trailer without any issues.