Review of Blue Ox Trailer Hitch Ball Mount - Adjustable Ball Mount With Pintle Hook - BLU25XR Video

The mounting holes on the B&W Pintle Hook Mounting Plate for 2-1/2" Hitches #BWPMHD14202 are 1-3/4" apart vertically and 3-3/8" apart horizontally. This measurement taken from center to center on the mounting…

When it comes to weight distribution, tongue weight is the most important factor. It looks like you are ahead of the game and accounted for that with each of these systems, great job. I would still recommend finding your actual tongue weight once…

Sure will! 2-1/2" shank ball mounts like the Curt Ball Mount #C79NR you mentioned are made to a standard size allowing them to be installed in all trailer hitches that are 2-1/2". You'll have zero issues using it in the Draw-Tite…

Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook #BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application. This is a nice, solid piece of towing gear that I recommend…

Yes, your 2020 Ram 2500's factory brake controller will work with electric over hydraulic(EOH) brakes. Like the HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi #HBA16. You might also have a LITE EOH mode and a HEAVY EOH…

I have another option for you but No, you cannot replace the 2-5/16" ball on the Blue Ox #BLU25XR with a 2" hitch ball. Instead I recommend going with the Gen-Y #325-GH-924 which has a similar rise/drop at 6" either way, and includes a…

The trailer hitch I recommend for a 2017 Ford F-350 is the Draw-Tite Trailer Hitch Receiver part #DT45508 which is a fit for all models whether you are replacing a factory hitch or just adding one yourself. It has a class v rating with 2-1/2"…

For your 2003 Ford F-250 with the frame dimensions you mentioned the correct Torklift SuperHitch you need is the part #TLF1002. The dimensions you listed are compatible with the fit of this hitch.

For that much tongue weight the best option for a weight distribution system would be the Blue Ox SwayPro part #BXW2003. This has a tongue weight range of 1,500-2,000 lbs and has built in sway control within the head of the system where it holds the…

The Blue Ox Adjustable Ball Mount #BLU25XR you were looking at weighs in at 41lbs.

The Draw-Tite Trailer Hitch #DT45508 for your 2016 Ford F-350 weighs in at 90lbs with all of the hardware.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…