Which Lock N Roll Coupler Fits On a 2005 Strarcraft RT10 Pop Up Camper?
Question:
Will this coupler fit on a 2005 Starcraft RT10? Seems to me like the latch and brackets for support poles would be an issue. Pictures attached. Is there another articulating coupler system that would work?
asked by: Daniel R
Expert Reply:
Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll # 336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the current coupler sits at where you see the welds. This will allow you to weld in a 2" # 336TS528, 2-1/2" # 336TS506 or 3" # 336TS508 channel style coupler. Do note these measurements are for the inside the coupler measurement so you will need to add 3/8" to each of these measurements to get the outer width.
I recommend getting the Lock N Roll Articulating Hitch w/ 5-Position Channel # 336VS503515 for your tow vehicle. This will allow you to best level your trailer and will work with vehicles of different heights should you switch vehicles or have this on different trailers of different heights.
Products Referenced in This Question
Lock N Roll Articulating Channel Tongue Trailer Coupler - 2-1/2" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 11000 lbs GTW
- 2-1/2 Inch Channel
- Latch Plates
- Lock N Roll
more information >
Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 11000 lbs GTW
- 3 Inch Channel
- Latch Plates
- Lock N Roll
more information >
Lock N Roll Articulating Channel Tongue Trailer Coupler - 2" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 6000 lbs GTW
- 2 Inch Channel
- Latch Plates
- Lock N Roll
more information >
Lock N Roll Articulating Hitch w/ 5-Position Channel - 2" Receivers - Vehicle Side - 11K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- Steel Shank - Matte Black
- Drop - 8 Inch
- Rise - 8 Inch
- Fits 2 Inch Hitch
- 11000 lbs GTW
- Class IV
- Off Road Coupler
- Lock N Roll
more information >
Product Page this Question was Asked From
Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K
- A-Frame Trailer Coupler
- Off Road Coupler
- Weld-On
- 11000 lbs GTW
- Latch Plates
- Lock N Roll
more information >
Continue Researching
- Search Results: 2 1/2 receiver hitch
- Shop: Curt Pintle Mount Attachment for Rebellion XD Adjustable Ball Mount
- Shop: Windshield Covers
- Video: etrailer.com Exterior Windshield and Wiper Blade Cover Comparison
- Video: Review of CURT Heavy Duty Receiver Hitch - Weld-On Hitch - C87CR
- Search Results: curt rebellion
- Search Results: deka
- Shop: Kuat Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch - 6-1/4" Long
- Shop: Gen-Y 2-Tang Clevis for 2-1/2" Hitch Receivers - 21,000 lbs
- Shop: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44" Wide
- Shop: Buyers Products Weld-On Receiver Tube with 2-1/2" Hitch Receiver - 12" Long - 20K
- Shop: Deka 2 Gauge Professional Service Booster Cables - 24' Long
- Shop: Buyer's Products Bolt-On 2-1/2" Hitch Receiver Tube - 20K
- Shop: Trailer Hitch
- Q&A: The Two Ways that Trailer 7-Way Wiring Colors are Used
- Q&A: Wire Coding For Pollak 7-Pole Trailer Wiring Socket # PK11720
- Search Results: lock n roll
- Search Results: ark trailer jack
- Search Results: articulating hitch
- Q&A: Lock N Roll Articulating Coupler A-Frame Dimensions
- Video: Lock N Roll 3-Position Channel Articulating Hitch Review
- Q&A: Which Lock N Roll Channel Trailer Coupler Fits 2.5 inch Wide Trailer Tongue
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Search Results: lunette ring
- Video: Curt Flat Plate Mount Lunette Ring Review and Installation
- Q&A: Pintle Hook/Lunette Ring Setup Recommendation for an Off-Road Trailer
- Q&A: Replacement For Shelby 5135 Coupler With 3 Channel
- Video: Draw-Tite 2 Inch Hitch Ball Mount Review
- Video: Review of Dometic RV Vents and Fans - Ultra Breeze Black Trailer Roof Vent Cover - DMC38FR
- Q&A: Will the Dometic Ultra Breeze Trailer Roof Vent Cover Work with Existing Flange on Dometic Fan