Blue Ox Adjustable Ball Mount with Pintle Hook Review BLU25XR Video

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C57UR comes with a 2-1/2" shank. The 2-5/16" ball has a gross towing weight of 20,000 lbs which is higher than the 15,000 lbs for…

One hundred percent yes, if you are not using weight distribution you can tow your travel trailer using the Rebellion ball mount you asked about: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR The #C57UR will fit your…

The Blue Ox Serrated Hitch Step for Adjustable Ball Mounts part #BLU33CR is designed only for the Blue Ox Adjustable Ball Mounts like part #BLU89XR. There isn't a step for the Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2"…

When it comes to weight distribution, tongue weight is the most important factor. It looks like you are ahead of the game and accounted for that with each of these systems, great job. I would still recommend finding your actual tongue weight once…

Sure will! 2-1/2" shank ball mounts like the Curt Ball Mount #C79NR you mentioned are made to a standard size allowing them to be installed in all trailer hitches that are 2-1/2". You'll have zero issues using it in the Draw-Tite…

Yes, there is an option for an adjustable cushioned ball mount with 8 inches of drop that fits your 2-1/2 inch hitch, which is from Curt: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR This ball mount fits 2-1/2 inch hitches, has…

I have another option for you but No, you cannot replace the 2-5/16" ball on the Blue Ox #BLU25XR with a 2" hitch ball. Instead I recommend going with the Gen-Y #325-GH-924 which has a similar rise/drop at 6" either way, and includes a…

There is pretty much a standard for channel mount couplers such as #DM12113-95. The channel width is usually 3 inches and the couplers are usually around 2-7/8 inches wide to fit in the 3 inch wide channel. Once torqued down there is no side to side…

When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to coupler.…

The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of…

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

The trailer hitch I recommend for a 2017 Ford F-350 is the Draw-Tite Trailer Hitch Receiver part #DT45508 which is a fit for all models whether you are replacing a factory hitch or just adding one yourself. It has a class v rating with 2-1/2"…