Blue Ox Hitch Anti-Rattle - Standard Anti-Rattle - BX88225 Review Video

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

Yes, it will. It looks like the rear rack on your Aventon Pace 500 step through e-bike stops right around the 11 o'clock position. The pivoting arms on the Saris SuperClamp HD Bike Rack item #SAR44VR will go low enough on your wheel for the…

The BulletProof Hitches 2-Ball Mount #MD256 is going to allow for play inside the receiver as this ensures the hitch does not get seized in receiver tube due to moisture and corrosion. I recommend checking out the Solid-Tow Adjustable 2-Ball Mount…

Yes, the Saris SuperClamp HD 2 Bike Platform Rack #SAR44VR will support up to 60lbs per bike, which is more than enough to carry your two Jetson Bolt Pro bikes which weigh 41lbs each, and is rated for motorhomes like your Forrest River Sun Seeker.

I took a look at all of our hitch bike racks rated to carry e-bikes and are motorhome compatible. We only have one rack that weighs under 40 lbs, secures the bikes by the wheels, and is motorhome compatible. It is the rack you mentioned in your…

Good question, and there are just two differences between the Saris SuperClamp HD and EX, which is the size of the receiver(s) they fit and motorhome compatibility: - Compatible With Motorhome & Fits 2" Receiver Only: Saris SuperClamp HD…

Curt does not have that measurement available, but you can determine this for yourself by taking some measurements from the underside of your truck. Using the diagram I edited for you, locate the weldnut that would serve as the rear-most attachment…

I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…

From the underside of the frame to the top of the crossbar tube would be 5.13 inches, and from the underside of the truck frame to the lowest point on the hitch, which is the bottom of the side plates, is 9.83 inches. You can see these dimensions on…

I went and pulled a Solid-Tow Adjustable, Aluminum Ball Mount #DTSTBM6825-2S from our warehouse to grab the measurement you asked for and found that it measures 1-3/4 inches from the center of the hitch pin hole to the closest edge of the anti-rattle…

The Curt MV Weight Distribution system part #C17062 that you referenced weighs 101 lbs.

The Blue Ox Hitch Receiver Immobilizer II #BX88225 is designed for applications where the hitch is 2-1/2 inch sized and you are using a 2-1/2 inch accessory. Whereas the part #BX88312 is for 2-1/2 inch hitches that are using an adapter to then use a…