How Much Does the Curt MV Weight Distribution System part # C17062 Weigh

Question

Question:

What is the total weight of this hitch??

asked by: DAVID H

0

Expert Reply:

The Curt MV Weight Distribution system part # C17062 that you referenced weighs 101 lbs.

expert reply by: Jameson C

0

Answer 1

You'll want to use the amount of links that allows the tow vehicle to sit as close to level as possible. So in your case you'd want to use 6 links since you said that gives you the more level height. Since your weight distribution system is…

view full answer...

Answer 2

All Curt weight distribution system have a shank included with them. Considering the price of the #C17062 you are still getting a great deal when you compare the kit to other brands. For a drop shank we have the part #C17124 which can do 9 to 10…

view full answer...

Answer 3

Yes, if you left the sway control off of the Curt MV Weight Distribution System #C17062 it would be perfectly compatible with surge brakes.

view full answer...

Answer 4

I looked up the bolt and nut sizes that come with the Curt weight distribution system part #C17062 and the sizes you need are 3/4", 1-1/8", 1-7/8", and 9/16".

view full answer...

Answer 5

The Curt MV Weight Distribution System #C17062 comes with a 2-5/16" hitch ball that has a shank with a 1-1/4" diameter.

view full answer...

Answer 6

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 7

The only weight distribution systems that do not allow backing up are those that use friction sway control (which is an added piece), so yes, you can absolutely back up with the Reese Pro system you asked about, which is the following part number: -…

view full answer...

Answer 8

The Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW #C17062 is not available without the shank. For your raised truck, you can interchange companies for the shank head, however the companies may void your…

view full answer...

Answer 9

There is not a factory brake controller plug-in port on your 2018 Ford Transit T250 so in order to install your existing Tekonsha Primus Brake Controller you will need to hardwire it in using the Wiring Kit #5506. This kit will provide you with the…

view full answer...

Answer 10

Weight distribution systems are prone to making some odd noises, but a sound that would wake that dead is probably on the higher than normal side of things. The lift brackets of the Curt kit part #C17500 that you referenced can be greased and you can…

view full answer...

Answer 11

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

How Much Does the Curt MV Weight Distribution System part # C17062 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching