Review of Timbren Vehicle Suspension - Spacer Kit - T68MR Video

Hello Jim. For you I Recommend the SumoSprings Solo Custom Helper Springs #SS47PV. These are 1,800 lb capacity urethane jounce springs which will replace the factory bumpstops. I like these for a few reasons. The 1,800 lb capacity will be enough to…

You would want to go with the Timbren kit that fits your 2020 Ram 1500 part #TDR1500DS and then since you have a 6 inch lift you'd need a quantity of 12 of the Timbren 1 inch spacers #A25723-90AH00 to take up the extra space.

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

To add a set a Timbrens to your 2022 Ford F-150 Tremor you will need the Timbren Rear Suspension Enhancement System item #TFR1504E. This system has a 6,000 lbs capacity and will help support your stock suspension system when towing. Since your Tremor…

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

Using a spacer kit like the #T68MR to allow one side of the truck's suspension to engage sooner will give you more support on that side but since it's hard to say if that will happen to be the sweet spot you are looking for in terms of…

Yes, you can still install the Timbren Springs #TFRTT350F on your 2013 Ford F-250 without the raised stop like you have seen in the images you found. I have included an image below which shows their other Kit #TFR250SDG for your F-250 on a truck…

The springs themselves included with the Timbren Rear Suspension Enhancement System #TFR250SDJ for your 2020 Ford F-250 measure 4-1/2" tall. When the mounting bracket is added you're looking at a total overall height of 6-7/8". I have…

Yes, The Timbren Spacer #T68MR will work with The Timbren Suspension Enhancement #TGMRTT35D on your 2016 GMC Sierra 2500 per the manufacturer. The kit already comes with (2) one inch spacers in the package. You can use up to 1 inch more on the…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

SumoSprings Solo Helper Springs unfortunately aren't really designed for lifted trucks and the manufacturer only recommends using up to a 2" spacer so the #SS65FR isn't going to be the best solution for you. Instead you'll want to go…