Drop of Curt Class V Trailer Hitch # C15703 for 2007 Chevy Silverado Classic 3500  

Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…

I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…

It is, I went and measured the distance from the mounting flanges of a Curt Hitch part #C15703 to the cross tube that we have in stock and found that it measures right at 6 inches. I attached an install video for you to check out as well.

The Draw-Tite #DT45519 is designed to be used on the 8 foot bed models of the GMC Sierra and will not fit the short bed models. That being said, we do have Class V hitches with a 2 1/2 inch receiver options available for your short bed truck. The…

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th wheel…

You will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System #RP66131 for your I-beam trailer. This system would be rated perfectly for your 10k trailer if it was going to be loaded near it's…

You can indeed install a weight distribution hitch like the Equal-i-zer #EQ37100ET on a trailer with an I-beam frame, but you'll need to have pieces of steel plate welded to the trailer frame to box it in to provide a secure mounting location for…

You cannot use a weight distribution system with a pintle hitch. You would need to remove the pintle hitch you have now in order to use a weight distribution system. Once you do this, I recommend using the Equal-i-zer Weight Distribution System which…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…