Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp for 3 Inch Hitch - GY65XR Video

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

I have included a picture showing Draw-Tite front mount receiver #65076 installed. It and the Curt hitch install in pretty much the same place.

For a 3 inch trailer hitch the hitch lock needs to have a 3-1/2 inch usable span like what the part #SHP2040-XL has so for your 3 inch hitch with a 2 inch hitch adapter this would fit and work well.

The #SHP2040-XL will work with most 3 inch receivers as long as the overall width of the receiver tube measured at the hitch pin hole isn't greater than 3-1/2 inches. If your receiver meets that requirement, the #SHP2040-XL will help prevent…

The Buyers Products 3" to 2" Receiver Tube Adapter part #337RTA302 is a good option to reduce your 3" receiver tube opening to a 2" receiver tube opening.

The hitch reducer we have for a 3 inch hitch receiver on a 2017 F-350 is the Buyer's Products Adapter #337RTA302. This will give you only a 3-7/8 inch extension while reducing the size of your receiver opening. If you need a longer extension,…

The wall thickness of the steel can vary from item to item but generally the wall thickness for hitch extender #HE06 is 3/16 to 1/4 inch. For the majority I have seen, it is 1/4 inch.

The Curt Front Mount Trailer Hitch Receiver #C31078, which is confirmed to fit your 2018 Ford F-250, will actually sit about level with the air dam on the truck meaning it won't change the ground clearance at all. When installing the hitch…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit on your 2020 Ford F-450 Super Duty. I have linked a video below that will show you the installation process on your F-450. In the video the installer refers to it as an intercooler…

I went ahead and confirmed with MORryde that the plastic trim piece shown in your provided photo is the standard trim molding on your 2006 Jeep X Model. With the Fender Mounted Jerry Can Holder for Jeep Wrangler TJ and YJ #MR69MR, you won't…

For a great front-mounted hitch for your single-rear wheel 2022 Ford F-350 diesel, I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31078. This will work perfectly with the Diesel engine in your truck since you…