Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (505 Customer Reviews)
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.
I found that the travel trailer OEM tail lights were blocked by the cargo carrier. I installed these light as an extension of the OEM tail light. These lights enhanced the OEM lights. Now I worry a bit less about the vehicles behind me.
Nicely done Optronics and eTrailer. Solid and simple snazzy, I need all the snazzy I can get. Great value.
Great purchase experience. 11-LED Optronics Trailer Light STL79RB was delivered as promised and fits perfectly. Recommend this item and will return for my future lighting needs.
Sean
1/24/2023
Update: Have trailered my boat 3-4 times per month in the last year and these lights are still burning bright! Great, reliable product.
Brake light has rubs and scratches on both bottom and top sides.
Disappointed in packaging, a thin clear plastic sheath inside a thin plastic mailing envelope. No protection at all during shipping.
Item was delivered in good condition packing was proper. Item was as described and fit properly.
John
3/4/2024
They are still working properly. Really appreciate the fact that in your ad that you had a description of the length the width mounting measurements.
Mike L.
3/5/2024
The LED taillights worked out great with my trailer rebuild. They will be protected at all times because I was able to have them tucked out of harms way. They are not low where backing up would endanger them and not protruding from the sides to be in the way either.
But they are still highly visible at all times from the side or rear. THANKS for a great product!
Jerry
11/12/2018
The tail lights were a great finishing touch to the rebuild of my utility trailer. The taillights are so visible and stay out of the way. They dont have those tender filaments in the old bulbs that a bouncing trailers play havoc with. Not to mention rusty bulb sockets that made the bulbs dimmer!
The clear LED tailight strips that came with my trailer started filling with moisture and were only partially working. Most trailer part places only had the 15" lights. You were the only ones I found with the 17" lights and a diagram showing the mounting hole centers and dimensions. The product pictures were great for checking the wiring. Quick shipping and the tracking link was great. A few simple tools & some butt connectors and I was done. Finished the job with clear caulking around the lights.I like the red strip over the clear stock one and the lights are easy to see even in full sun.
Worked great, I used them on the sides of my headache rack.
Steve S.
5/31/2021
There still working perfectly
At first I was shipped the incorrect part but with a quick phone call with an actual person the mistake was corrected and I received the part in a timely
I installed this light as a third brake light at the top of my camper. LEDs, no maintenance, works great. A big improvement in safety. Order service was prompt and accurate. Good job.
Looked at several lights on amazon. Flat on the back makes for a difficult connection. Found these on etrailer and worked great. Their is a good space behind the light to deal with the ground and wires. Excellent buy! Very happy with purchase. Shipping was fast and great follow up on purchase. Will buy again!
I like a lot of folks did my research, I have a specific requirement for this cargo carrier, I need it to hold a dock box made by lifetime. And this carrier works perfectly. It was very easy to assemble. And very sturdy. I enclosed a picture of the dock box installed. I had to do some modifications to the dock box, but it worked out beautifully. I highly recommend this cargo carrier for the price quality and value.
I used this as a brake light and it has handled offroad abuse and has continued to work without any segments burning out. It was wired to provide the brightest output.
These were to replace some on the back of my motorhome that I installed about 4 years ago. They corroded with Michigan’s winters and salted roads but looked so good I replaced them with fresh ones.
I really like them for my teardrop trailer we are building. It was an excellent choice. Thank you
Replaced the crappy original stick-out basic lights with these LED ones under the lip of the deck. Fit great, work great. Good product, as expected from etrailer.
Rebuilt my boat trailer, have had them underwater several times and working
Perfect. Great easy product!
Beautifully designed, looks like two light bar, very bright and effective. I recommend this product.
The led lights were very easy to install and they look great. Thanks
We installed two lights on a ramp for the rear of our car. They were so simple to install and they are very bright. Great product!
Wanted to change my back lights on my toyhauler so bought these and they look and work great
Easy to hook up and work perfect very b right.
Paid for 2 day shipping. It ended up taking about as long as normal ground shipping. This was my first purchase through etrailer. I will stick to RealTruck going forward
Not real happy at this point. Spent most of the day filing down the back, ( center) of the light for mounting on a flat surface. Both rails on the back of the light created a bow when screwed onto a flat surface. If I would have just attached it to the flat surface, it would have put the circuit board in a bind and I didn't think that would be a good idea knowing the beating they would take if mounted them like that on the back of my flatbed trailer. With one end screwed down, the other end was approximately 1/8 of an inch raised above the mounting rail. If mounted like that, they would not have lasted 3 weeks before cracking the circuit board. as received, the small rails on the back did not provide a flat surface for mounting. But they did when I got done filing them. If anybody is going to screw an object 17" long onto a flat surface, ( unless it is made out of rubber) it better be flat also. On top of that, the wires could stand to be a bit longer.
Dave G.
12/29/2017
lights working great. I could not have made a better decision on what and who in order to obtain my desired results.
ordered for use on trailer with rear ramp that when closed (verticle) stands approx. 6'. Lights on the trailer are low to ground approx. 1'- 18". My concern was visibility of trailer brakes. Your item was flat backed long and narrow ideal for mounting at top part of trailer ramp mentioned earlier. Much more visible approx 5' high and of course led lights, much brighter. Feel more secure towing with addition of your item. Easy to install, quality, and price reasonable.
Bruce R.
3/22/2018
Same opinion as right after installed, still pleased!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timothy
3/3/2024
This is my second pair that I have purchased and both sets 1@1year ago the other more like 5 years ago are still like new and going strong. Let’s all say durable! And yes I would recommend to family and friends and random strangers alike. Let’s see here, reviews like “Stars”, 5 stars x 2 sets = 10 Stars, can I do that?