Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
17" x 1-3/8" x 1". Waterproof, 3-function trailer light serves as a stop, turn, and tail signal light when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-wire design.
Features:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
Specs:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (504 Customer Reviews)
17" x 1-3/8" x 1". Waterproof, 3-function trailer light serves as a stop, turn, and tail signal light when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-wire design.The lights were perfect, as advertised, the mounting was exact and installation easy. The product arrived a day early and I would highly recommend etrailer for any of their products. Also the lite bar was exactly the same as the old ones on my cargo trailer.
Lights were an exact replacement fit for the factory lights that were not working well. The new lights are brighter and better for safety.
Works great
I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer
My trailer lights developed a short in the right turn signal.
I traced the problem into the wall of the trailer.
So I decided to replace the stop turn signals
These lights are just what I was looking for
Very light weight
Easy three wire set up
There are no instructions
Mine was..
White-ground
Black-tail
Red-stop/turn
Bright, great selection, accurate description. Staff is pretty cool to.
Pete
10/23/2023
So far no issues, still working and bright.
Mike L.
11/10/2023
Put them on the back of my teardrop for added safety. Tricky mount but my neighbor is good at welding aluminum I got at Home Depot.
Thanks
Work perfect. Easy to install.
I had to replace a tail light for my enclosed and Etrailer made finding the light simple and quick shipping, thank you Ashley E for all the help
Yes, the STL89RCB is impressive especially at night. It was a badly needed upgrade to my existing brake/tail lights which have been partially blocked by new bike rack. I gave it 4 stars since the pigtails from the light were not consistent: on one light, the red wire was the tail/running light but the other used the black wire. Good thing to check both lights before soldering.
Jake
5/7/2019
Still working great
Jake
5/7/2019
The lights worked well for my Casita trailer since i have bikes on the back blocking the primary lights. They are quite visible from other drivers.
Fast shipping, super easy wire for wire replacement and perfect fit.
Great product, after one year still like new
Once I got to the wiring of the trailer and made the connection, the Lights are perfect for the trailer.
I will buy from etrailer again when needed.
Robert
7/7/2020
the lights work perfectly
Purchased replacement LED tail lights. Lights arrived in a timely manner and are an exact replacement by part number.
Thank You for the timely service.
Tom B.
5/8/2018
Been on trailer for the last 11 months and is working great
This is the second order of its kind I have made. etrailer shipped the item in a reasonable time and it is packaged well arriving safe and sound. This is a quality light I would recommend to anyone interested in adding that additional touch with, tail, brake & turn combo. I used mine on the rear of a large fifth wheel RV as a second set of lights up high to be more visible to larger vehicles and at a greater distance. My rig is 13 feet high and factory lights are mounted real low.
We have three of the lights on the back of our 20' cargo trailer. Everyone can see us, see the turn signals, clear night or foggy night. We feel a lot safer on the road with these lights. Thanks, eTrailer for a great product
Great Experience. You say what you do, and do what you say.
More companies should follow this example.
Installed new LED Tailights on cargo trailer, but unable to try them so far.
I don't expect any issues. Product looks much better made than
original.
I will be back in the future.
THANK YOU
Looks great as a clearance light/center brake light on the rear of my horse trailer.
Just use a current transformer on the trailer brakes' wiring to energize a relay powering the brake function (red wire).
Used the lights on a headache rack for extra brake lights. LEDs are bright and look good. I did notice that since there is no bezel for these lights, the clear plastic lets you see the wiring and the surface that the LEDs are mounted on. Not a big deal where I have these mounted but it may be a concern for some.
Light em up!!!If you wanna be seen then these are what you need. Beautiful LED's! I also installed the 6 1/2" X 2 1/4" trailer stop/turn/tail lights, from etrailer, and you can see my trailer from Miles away!! I also installed the etrailer clearance lights, red and yellow, 2 1/4" X 1" LED's.
And I have the Firestrip on F-150 King Ranch.
I am quite easy to see with the Awesome lighting products from etrailer!
Shipping is LIGHTning Fast!! etrailer Rocks!
product is what I am looking having 11 diode is perfect.
Original I went back to trailer company to get lights. which they no longer had.
Back side of light has a recessed pocket that i can cover grounding screw.
this in turn will give me a flushed light on back of trailer, a finished look.
By no means am an expect.
With that you have answered all my questions
Communication is a big help and you are excellent at that
thanks for the help!
This was replacement for OEM LED lights for a trailer. Items were exact fit for original lights.
etrailer has the most extensive inventory I've found for any trailer item. Great service and fast shipping. Not my first time...I keep coming back.
Thanks etrailer for being there!
I replaced my taillights with the Streamline LED lights and they work very well. All the lights are always on unlike my old ones that I replaced. I'm very happy with these lights.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Wayne
7/10/2021
The lights are perfect, same as what I had and I would order more products if I need them .