Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
15" Long x 1-1/2" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 14-1/8" centers - hardware not included. 3-Wire pigtail.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number STL63RV. This is the Optronics Thinline LED trailer light. This is going to serve three functions. It's going to provide your stop light, your taillight and your turn signal light. It's going to feature a sonically sealed waterproof housing and lens unit so it is submersible. The Thinline series is going to have a really nice low profile design so that the light can fit into tight spaces.
It is an LED unit. LEDs are going to make great replacements for incandescent lights. They're going to last longer, burn brighter and they're much more efficient. You don't ever have to worry about replacing the bulbs or the brittle filaments. Optronics is going to cover the LEDs with a lifetime warranty. The lens is going to be made from a polycarbonate material, very strong and very durable.
It's going to have the nice red lens. Here on the back side we're going to have the three-wire pigtail. Your white wire's for ground, black wire's for power, red wire's for stop and turn signal. You're also going to get the black foam gasket. This is going to match the footprint here on the back of the light.
It's got the cutout for the wires and that's going to be installed during the installation in between the light and the mounting surface. You're going to have your mount holes one on each side of the light. Those are going to be separated on center by 14-1/8 of an inch. Your mounting hardware is not included. This light is Department of Transportation compliant. We'll take a look at the overall dimensions starting with the overall length.
That's going to give us a measurement of 15 inches. Measuring this direction at the widest point, that's going to be 1-1/2 inches and then the depth or the thickness, that's going to give us a measurement of about 5/8 of an inch. This light contains nine diodes, power draws at 12.8 volts. For the stop and turn lights we're looking at .350 amps and for the taillights we're looking at .022 amps. We're going to go ahead and hook it up to our external power source. That way you can see what it looks like with power running to it. Again, the white wire's going to be our ground connection, red wire's going to be for the stop and turn and black wire's going to be for our power or for the taillight. You can see here it sends out a nice consistent signal. The multi-diode design is really going to optimize our light output. We'll go ahead and apply our brakes. You can see how that illuminates for a stronger signal output. It's also going to function like that when we apply our turn signals. That's going to do it for our review of part number STL63RB. This is the Optronics Thinline LED trailer light. .
Average Customer Rating: 4.8 out of 5 stars (974 Customer Reviews)
15" Long x 1-1/2" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 14-1/8" centers - hardware not included. 3-Wire pigtail.
Perfect replacement for burnt out lights. They are holding up great.
Perfect fit for my 2016 Cedar Creek
Product was an identical replacement for my existing light strip on my RV.
Thomas
3/7/2023
LED tailbrake light is working fine.
I purchased the Thinline LED Trailer Tail Light, and BoatBuckle G2 Tie down Straps, love both products and I am very satisfied with them. Great pricing and great products! Thank you!!
It's just what the doctor ordered. Easy to switch out the old one to the new one.
Thank you!
I have a 2015 Cedar Creek 5th Wheel and 3 of the diodes in the tail light burnt out. I was told by my Father In Law to look on your web site as he has used your company in the past. I was amazed at the number of products that you carried. I was able to find the exact tail light for my rig and ordered it. We ordered the tail light on Friday November 8th and it was delivered to my mail box in Texas on Wednesday November 13th. Outstanding service. Thank you very much.
Great lights! Super bright and easy to wire up. I housed mine in a protective wood frame and covered them with wire mesh so they would not get damaged backing up into underbrush. Would definitely buy again!
I finally found the exact replacement light for my RV. Thank you e-trailer!
The taillight bars arrived on time and are exactly as represented. I have installed one and it works properly so far. The second one is an extra in case of a future failure while traveling.
Perfect match replacement for my Cedar Creek Fifth wheel tail lamp. Delivery very quick.
Fast service and item was perfect replacement for bad tail light.
All items ordered were in the box to do the needed repairs -
I can't wait to get started - Parts look good - Thanks
Nice leds. Very inexpensive
Steve C.
8/20/2018
Great!
Fred
10/7/2023
Great- All LEDs have worked, and was a perfect size.
A great easy to install product, still works and looks new. Highly recommended.
No problems or issues great price
Exact fit. No issues at all.
The lights look to be made very well and sell at a good price. The best thing about them is the people that sell them! I will buy from them again. Bob
great job
Perfect fit thanks to your illustration. It even lights up!
Yea
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bryan
8/18/2023
A year after I purchased this product and it is still working like new.