UltraThin LED ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
(105 reviews)
Price: $20.83
In Stock
UltraThin LED ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
Item # MCL70RBF2
Retail:$37.03
Our Price: $20.83
You Save: 44%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (105)
- Q & A (0)
- Videos (2)
- Photos
Optronics Trailer Lights - MCL70RBF2
- Clearance Lights
- ID Bar
- LED Light
- Red
- 15L x 1-1/2W Inch
- Surface Mount
- Rear Clearance
- Submersible Lights
- Optronics
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design with female.180 bullets. P2 rated.
Features:
- Low-profile LED trailer light functions as an identification light bar for trailers wider than 80"
- Ultrathin design allows for installation in tight spaces
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Red lens over white LEDs
- Compatible with 12V DC systems
- Mounts to surface of trailer - hardware not included
- 2-Wire design with female 0.180 bullets
- DOT compliant
- P2 rated
Specs:
- Overall dimensions: 15" long x 1-3/8" tall x 5/8" thick
- Distance between mounting holes (center on center): 14-1/8"
- Diodes: 3
- Power draw at 12.8V: 0.038 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL70RBF2 Optronics UltraThin LED Identification Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
California residents: click here
Video of UltraThin LED ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL70RBF2 Review
Today we're going to be taking a look at the Optronics Ultra Thin Line LED Identification Light Bar. The Red Thin Line ID light bar is for over 80" applications. It is sonically sealed, so it's got a nice water-proof design to it when it comes to the lens and the housing. It is a two-wire design, so you're going to have your lead wires for power and ground: whites for ground, blacks for power. They're going to have the point 1.80 female molded barrels on the wires, so that allows for an easy connection if you have that type of set-up. If not, those can be cut off and used for hardware applications.
You can just expose the regular wires. When it comes to the housing and lens, we're looking at a polycarbonate construction. It's very strong and durable. It's got a corrosion-resistant design. This is a surface mount installation, so it mounts directly on the surface of what you want to attach this to. You have two mount holes on the unit, one located on each end.
Hardware is not included. This is SAE and Department of Transportation compliant. It's a full LED system. LED's are going to make great replacements for incandescent lights: They last longer, they burn brighter, they're much more efficient. You don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments. Now we're going to take a look at the overall length measurement real quick, measuring from edge to edge.
This is going to give us a measurement of right around 15 inches, and then measuring the width, that's going to give us a measurement of about 7/8". Then the thickness, this is how far it sticks off the mounting surface. A really low-profile design that's going to measure 5/8" thick. The light's going to contain a total of three LEDs. The power draw of 12.8 volts is 0.038 amps, and Optronics puts a lifetime warranty on the LEDs. We're going to go ahead and hook it up to our external power source so that we can see what it looks like with power running to it.
We'll also be able to turn off our overhead lights, so you can see it in a low-light setting. You can see here that the light sends out a nice, clear, consistent signal. Again, it's got three LEDs that fills up the light bar, and the multi-diode design just really helps optimize the light output. That's going to do it for today's look at the Optronics Ultra Thin Line LED Identification Light Bar.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
UltraThin LED ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens - MCL70RBF2
Average Customer Rating: 4.8 out of 5 stars (105 Customer Reviews)
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design with female.180 bullets. P2 rated.by: Lawrence05/05/2022
Excellent LED light for trailer. My light had gotten cracked somehow and one of the diodes was dead. Water intrusion/crack did it.
Took a while but found the identical replacement. Same size, same number of diodes and same hole centers for mounting. Perfect.
Took a few days to arrive but it fits perfectly. The connector wires were identical to original.
The last one lasted 4 years. I’m sure it would have been longer had I not hit something when unloading/loading the boat.
Thanks to etrailer.com.
by: Sandra 04/17/2024
Great product, great price.
by: Ron 07/11/2023
Exact replacement fit. Very bright.
Thank you
by: Harmel06/21/2023
been using etrailer for years never had an issue! recommend highly..
by: Brad K10/29/2022
After one year all the lights are still functioning great. I've ran into them a couple of times with another trailer and they held up to the impact well. Nice lights I would buy them again
by: Michael 05/15/2023
Replaced my oem light that was dead in one season. This one starts its second season and is working flawlessly. Check back with me next year... so far I'm happy with the product.
by: Michael 09/09/2022
This light bar was a direct replacement from the original bar that came on my Rangertrail trailer. It was easy to install and has been working great now for over a year.
by: Scot02/28/2019
Exactly what I was looking for and high quality perfect match to my existing led lights. Etrailer the best place to purchase stuff for your trailer and towing needs . I have been a customer for years and will continue, great videos on there products and fast shipping. Highly recommend
by: Michael 09/24/2022
Easy to search website. Fast delivery even on standard shipping. Will continue to do business with etrailer. The product itself was an exact replacement right done to the factory connecters
by: Jason 02/13/2023
Great product. Exact replacement to what I had. Exactly as advertised.
by: Evan 05/05/2023
It’sa light
by: Evan04/27/2016
Love the slim-profile. Appears it won't suffer the same fate as the older style from loading vehicles on and off the trailer. Easy to mount, completely sealed unit.
by: Mark 07/09/2020
After being told at a local boat dealership that the light is no longer available and that I would need to retrofit their product and drill holes into the frame I looked on line, found e-trailer and the exact light and wiring. No brainer, shipping was quick and installation was a breeze
by: Lewis08/07/2020
I received my light bar and when I inspected it it looked like it wasn’t sealed very good where the wires enter the waterproof lite. It also looked like the wire had a little cut in the outer shield. So before installation I caulked around the wires then installed the lite.
by: Stephen04/10/2023
Just what I needed at a fair price and fast shipping.
by: 338OKH07/31/2018
Excellect products. Fit was exceptional. Easy installation. Excellent quality.
by: Cheryl 08/10/2021
Nice light. Easy to install and mounted perfectly on the back of my trailer.
by: Gary D06/13/2017
Always a pleasure. Quality products, great communication, fast delivery. Can't ask for any better. I am sure to order again. Thank you.
Gary D.
6/13/2018
Good as new. Still well pleased.
by: couchpotato05/03/2017
Looks and works great.
Thank you et railer.
by: Matthew 09/08/2022
Fast shipping and item as described.
by: Kenneth05/12/2019
Very good product! Will be installing today on my motorhome.
by: John D05/04/2020
Great product! The original light that came on my boat lasted 3 months and filled with water and blew. Had this one a year now and still burning strong!
by: Tracey 08/12/2020
I found the website easy to use. The part description very detailed and the check out was fast! After the order was placed I received a follow-up email once the order shipped, so I did not have to revisit the website for updates. Great Experience!!!
by: 09/14/2022
Lori b helped me an she was very helpful. Thx
by: Mark 05/12/2023
25
105
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement LED Trailer Tail Light Measuring 15 by 1-3/8 Inches with 14-1/8 Inch Mounting HolesWe actually have two red LED lights that are 15 inches long and 1-3/8 inches wide that have a 14-1/8 inch hole spacing. Parts # MCL70RB and # MCL70RBF2. They will both fit into your chrome base, # A69CB.
view full answer...
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Written by:
Adele M
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lawrence
5/6/2023
This light continues to perform and work perfectly. Very pleased how it has held up in salt water. Note that I rinse it after each use. That’s a must !