Looking for 24 Inch Long 1 Inch Tall LED Tail/Turn/Stop Light

Question

Question:

Greetings, im looking for 24 inch 1 inch tall LED tail light Turn Signal, Brake Light and Running Lights. Thanks

asked by: Keith

0

Expert Reply:

The longest tail/turn/stop led light bar that we have that is similar to the Optronics # STL2RB that you referenced is the Optronics # STL79RB, which is 17 inches long and 1 inch wide. This unit is sealed so it is waterproof and contains 11 LEDs.

Past the 17 inch point, you get into 48 inch running lights that go on the tailgate of a truck.

I have attached a brief video demonstrating the 17 inch bar.

expert reply by: Lori W

0

Answer 1

The Camco RV Adjustable Screen Door Standard Grille #CAM43980 comes with screws that you would use to attach the frame of your door. No special brackets needed, just drill directly to the door frame.

view full answer...

Answer 2

The Camco RV Adjustable Screen Door Standard Grille #CAM43980 referenced in your question measures 24 inches long one way and 20 to 29 inches the other way. The screen can be mounted in either direction. I have attached an image to assist.

view full answer...

Answer 3

Here the e-track and e-track accessories you are going to want to accomplish what you are looking to do. We offer the e-track in 5 foot sections like #E19148 which you'd need to install where needed on your trailer, we have the e-track…

view full answer...

Answer 4

In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running. How much the capacity would be diminished by pulling 90 degrees to the side will…

view full answer...

Answer 5

The Rampage Wireless Backup Camera #RA7710 that you referenced is a great option for a wireless camera, since it has the magnetic base it can be mounted in a variety of places around your vehicle or trailer. My contact at Rampage said that you can…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders…

view full answer...

Answer 9

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2"…

view full answer...

Answer 10

Hey Ryan, the plate thickness of the CE Smith U-Bolt Plate part #CES95FR that you referenced is 7/32 inches.

view full answer...

Answer 11

Hello Chris, it sounds like you are definitely on the right track here. When replacing an equalizer, it is critical that the replacement equalizer is identical in size to the original equalizer. There is a small amount of tolerance there, like…

view full answer...

Answer 12

Yes, they are if your axles are overslung and the springs sit on top of them. The SumoSprings Trailer Helper Springs for 5-8K Axles item #SS26MV will work with a triple axle set up. They do a great job of absorbing road shock while also working to…

view full answer...