Hot-Line LED Trailer Light Bar - Stop, Turn, Tail - Submersible - Red Lens
(143 reviews)
Price: $30.92
In Stock
Hot-Line LED Trailer Light Bar - Stop, Turn, Tail - Submersible - Red Lens
Item # 328-003-6017R
Our Price: $30.92
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (143)
- Q & A (0)
- Photos
Command Electronics Trailer Lights - 328-003-6017R
- Tail Lights
- LED Light
- Red
- 15-1/4L x 1-1/4W Inch
- Surface Mount
- Stop/Turn/Tail
- Submersible Lights
- Command Electronics
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, tail, and turn functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. Surface mounts to trailer. 3-Wire pigtail.
Features:
- Trailer tail light provides stop, turn, and tail light functions
- Sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Rated for up to 100,000 hours of operation
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base with acrylic lens
- Red lens with red LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- Can be mounted horizontally or vertically
- 3-Wire pigtail
- DOT and SAE compliant
- Meets FMVSS 108 requirements for automotive lighting
- Assembled in the USA
Specs:
- Dimensions: 15-1/4" long x 1-1/4" tall x 1/2" deep
- Distance between mounting holes (center on center): 13-13/16"
- Diodes: 13
- Operating voltage: 9V-16V DC
- Wire lead length: 7"
- 1-Year limited warranty
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
003-6017R Command Electronics Hotline LED Trailer Light Bar - Stop, Tail, Turn - Submersible - 13 Diodes - Red Lens
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Hot-Line LED Trailer Light Bar - Stop, Turn, Tail - Submersible - Red Lens - 328-003-6017R
Average Customer Rating: 4.8 out of 5 stars (143 Customer Reviews)
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, tail, and turn functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. Surface mounts to trailer. 3-Wire pigtail.by: Robert03/30/2024
Parts arrived two days early, packaged nicely to prevent damage. Parts arrived without any damage.
by: Scott 02/12/2024
Perfect replacement for my Dynamax 3rd brake light
by: Mark 08/16/2023
Exact replacement, timely delivery. Can't ask for anything more.
by: Eric08/10/2021
They last about a 3 months. I mounted 4 of these on my flatbed and within one month I had a 1/4" of water inside of them. I drilled drain holes in the bottom of them and then after another 3 months, started loosing LEDs in each. Very dissatisfied. Have since gone to another website for my flatbed and all my trailer tail lights.
by: John V12/27/2020
This was purchased to replace a third brake light on my snowmobile hauling deck the stock got moisture inside and about half the LEDs inside stop lighting. The one I purchased from etrailer is completely sealed no way for moisture to get inside works great.
by: Ray 05/14/2023
Nice and bright with fast delivery
by: Jose 08/15/2022
Works excelent.
by: Tony11/29/2019
Everything I ordered was high quality and priced fairly. Shipping was super fast, quicker than I expected. Super satisfied.
by: Dustin 09/07/2021
Everything was as expected. Seems like a good product. Time will tell.
by: Manuel02/14/2022
Thank you for the amazing purchasing and shipping process. I felt like you all went above and beyond keeping me updated on my purchase.
by: James 05/23/2021
The right customer service, the right part the first time at the right price!
Thanks,
j
by: Roy 08/22/2023
by: Steven 01/27/2021
Received the lights in a timely manner.
by: Gil 09/08/2022
by: Todd 12/19/2023
by: David 07/22/2023
by: Gary 01/27/2023
by: Michelle 11/23/2021
by: Craig 01/23/2023
by: Herbert 04/20/2023
by: James 07/23/2021
by: Jesse 02/04/2024
Light is great. Listing for light does not clearly specify that it is a RUN light as well as TURN SIGNAL. Only assumed so from seeing 3 wires and watching video. It would be an advantage if all lights sold had gaskets to waterproof light to mounting surface.
by: JJ02/10/2024
Our third brake light had only half of the diodes working and we needed to pass a state inspection. This replacement shipped quick and was very easy to install. Works great and inspection passed.
by: James04/28/2024
Great replacement brighter than old one ..
by: Terry 04/29/2024
Got what I ordered at a good price and got it promtely
25
143
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Dimensions of Command Hot Line LED 328-003-6017R Third Brake Lamp Light BarWhen mounted horizontally, the Command Hot Line LED # 328-003-6017R Third Brake Lamp Light Bar measures 1-1/4 inch in height, as shown in the provided photo. The lamp is 15-1/4 inches long in total, with mounting holes that are 13-13/16 apart, 1-1/4 inches tall and 1/2 an inch thick. If you click the provided video, you can see a product description video featuring this lamp.
view full answer...
- Is Wire Harness on Back of Hot-Line LED Third Brake Trailer Light Bar CenteredIf you check out the attached picture of the Hot-Line LED Third Brake Trailer Light Bar # 328-003-6017R that you referenced you can see that the wiring harness is right in the middle of the back of the light. A hole that is 3/4 inch in diameter would work well.
view full answer...
- Does Command 328-003-6017R Hot-Line LED Trailer Third Brake Lamp Include a GasketBecause it's a sealed unit and designed to be surface mounted, the Command # 328-003-6017R Hot-Line LED Trailer Third Brake Light Bar doesn't include or need a gasket. Because it's designed to be submersible, the unit is completely waterproof. If your concern is water ingress into the vehicle it's mounted on through the hole that the wires pass through, running a generous bead of silicone sealant like # 0160297 around the hole would do a good job of sealing things up. I've linked you...
view full answer... - Do you Have a Clear Third Brake Light Trailer Light Bar with Red LedsI have a couple of options with them but not exactly what you're looking for. One option is the Hot-Line LED Third Brake Trailer Light Bar w/ Reflector part # 328-003-6017X and the Hot-Line LED Third Brake Trailer Light Bar part # 328-003-6017R. The only difference is that the version has a reflector and the R does not.
view full answer... - How To Install the Hot-Line LED Trailer Light BarThe Hot-Line LED Trailer Light Bar part # 328-003-6017R is a tail light; the white wire is for ground, the black is for running, and the red wire is for stop/turn. If you were going to use this as a third brake light then you would need to separate out the turn signal circuit using a module like the 3rd Brake Light Logic Module part # PP20-702. I don't recommend connecting both yellow and green wires to the light, you would need to do one or the other with the module in-between.
view full answer... - Replacing Running Light On Top of 2005 Alpenlite Aspen Travel Trailer For a 3RD Brake LightTo convert your current running light to also act as a 3rd brake light on your 2005 Alpenlite Aspen 26RB Travel Trailer you will need a Pacer 3rd Brake Light Logic Module # PP20-702 to wire in your harness. The Hot-Line LED Third Brake Trailer Light Bar # 328-003-6017R will work as a 3rd brake light. You are going to already have power for the running lights (black wire on Hot-Line) and ground (white wire) at your mount for the running light. The brake light (red wire) will attach to...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Kathleen M
Installed by:
Cole B
Installed by:
Andy C
Updated by:
Wilson B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.