If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveL sensors (sold separately) for single-digit accuracy. Also displays your battery voltage.
Features:
Specs:
Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.
The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.
Get the Model You Need
SeeLeveL monitors come in a variety of configurations depending on your specific requirements.
Model | Fresh | Gray | Black | Galley | Propane | Water Pump Switch | Water Heater Switch | Bluetooth | Multiplex Compatible |
---|---|---|---|---|---|---|---|---|---|
SE94VR | ✔ | ✔ | ✔ | ||||||
SE34VR | ✔ | ✔ | ✔ | ✔ | |||||
SE44VR | ✔ | ✔ | ✔ | ✔ | |||||
SE64VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
SE74VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
SE67VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
SE37VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
SE47VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
SE97VR | ✔ | ✔ | ✔ | ✔ | |||||
SE84VR | ✔ | ✔ | ✔ | ✔ | |||||
SE24VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
SE57VR | ✔ | ✔ | ✔ | ✔ | ✔ |
If you are replacing an old tank monitoring system, you'd want to check which functions are being provided by the existing panel. Some models incorporate switches for pumps or heaters or are providing information on propane levels. You'd want to pick the SeeLeveL monitor that can provide for all of these features.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the C-level RV holding tank monitor for your fresh, your gray, your black, and your galley tanks. Now basically, if your RV tank monitor readings change from 25% to empty in the blink of an eye, that's usually gonna be a problem. Do your traditional tank monitors have a reputation for being unreliable Basically, only a few sensors are installed inside, meaning that they usually only measure in quarter increments and it can send false readings if they get dirty. And when you're keeping an eye on how much fresh water you have, the difference between 25% full and empty will mean a lot, and that inaccuracy can be a problem. What's nice with this monitor, this will display the levels of the RV's fresh, gray, black, and galley tanks at just the push of a button.
You can see right down here. It is designed to hard wire to C-level sensors that are mounted on the outside of the tanks. Now, the sensors we do sell separately on our website. And if you notice right here, there's a button for battery. It'll also detect battery voltage.
This monitor checks the status and signal strength of the sensors using diagnostic mode, and it'll help improve accuracy during the install. This will alert you of any errors or calibration issues with various display codes, and the codes are explained with suggested solutions in your user's manual. This will work with multiple monitors, so you can check tank status from the service bay and inside your RV. And it installs very easily. All you have to do is cut a 1-7/8 inch by 3 inch hole for the recessed mount monitor and then screw it in place with the included screws.
If you notice, it does include this pigtail, which is needed for installation. You just push it onto your connections. Now, existing wiring from your old tank monitor system can be used to ease the install. Application, again, this is for four holding tank systems. You can see them all listed there, and then to check the battery.
The monitor itself, if I give you the dimensions, the width on it is right at four inches. The height top to bottom is about 2-3/4 inches tall. And the depth of it or thickness of it is right at about, including the plugin back there, about 1-1/4 inches. But that should do it for the review on the C-level RV holding tank monitor for fresh, gray, black, and galley tanks.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveL sensors (sold separately) for single-digit accuracy. Also displays your battery voltage.Had to replace this monitor and the customer service folks were happy to replace it without questions!
Do you have a question about this Smart RV?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.