Get advanced tank monitoring for your advanced RV. This monitor is compatible with multiplex, RV-C systems so you can get improved readings at your primary control panel. Accurately tracks 3 holding tanks using SeeLeveL sensors (sold separately).
Features:
Specs:
Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.
The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.
Multiplex Compatible
This monitor is compatible with RV-C, multiplex wiring systems in RVs. This method of wiring allows multiple components in an RV to be operated by splicing them all into a single wire. This single wire usually connects to a central control panel, letting you control everything from lights, slides, and temperature from one place. This also simplifies the wiring process in RVs, since every component doesn't need to be individually wired to its own control panel.
With multiplex compatibility, this monitor can send accurate tank readings to a primary control panel. It will still work in RVs without multiplex wiring - just wire it normally. But if your RV doesn't have multiplex wiring, and you have no plans to get a multiplex system, then you can save your money and choose another SeeLeveL monitor without this capability.
LPG Monitoring
Large RVs with permanent propane tanks often feature wired sensors on their gauges. These can go by different names, such as LPG gauge sensors, tank level monitors, remote ready dials, or R3D dials. If your RV has an interior panel for monitoring LPG levels, you know you're good to go with wiring already in place for an easy install. If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor.
SeeLeveL sensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.
Get the Model You Need
SeeLeveL monitors come in a variety of configurations depending on your specific requirements.
| Model | Fresh | Gray | Black | Galley | Propane | Water Pump Switch | Water Heater Switch | Bluetooth | Multiplex Compatible |
|---|---|---|---|---|---|---|---|---|---|
| SE94VR | ✔ | ✔ | ✔ | ||||||
| SE34VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE44VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE64VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE74VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| SE67VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| SE37VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE47VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE97VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE84VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE24VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE57VR | ✔ | ✔ | ✔ | ✔ | ✔ |
If you are replacing an old tank monitoring system, you'd want to check which functions are being provided by the existing panel. Some models incorporate switches for pumps or heaters or are providing information on propane levels. You'd want to pick the SeeLeveL monitor that can provide for all of these features.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at SeeLeveL's Multiplex Compatible RV Holding Tank Monitor for fresh, gray, black, and propane tanks. If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveL sensors, which are sold separately, for single digit accuracy. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from outside of the tank, and the sensor's flexible circuit board sticks in place, it measures along its entire height, this makes it accurate in single digit increments. This monitor displays the levels of your RV's fresh, gray, and black tanks at a push of a button, and it can also display your propane levels and battery voltage. If your RV has an interior panel for monitoring LPG levels, you're good to go with wiring already in place for an easy install.
If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor. Now, this monitor is compatible with RV-C multiplex systems to display tank levels on your center console. This method of wiring allows multiple components in an RV to be operated by splicing them to a single wire. This single wire usually connects to a central control panel, letting you control everything from lights, slides, and temperature from one place.
This also simplifies the wiring process in RVs, since every component doesn't need to be individually wired for its own control panel. With the multiplex capability, this monitor can send accurate tank readings to a primary control panel. It will still work in RVs without multiplex wiring, just wire it normally, but if your RV doesn't have multiplex wiring, and if you have no plans to get a multiplex system, then you can save your money and choose another SeeLeveL monitor without this capability. This works with multiple monitors, so you can check tank status from the service bay and inside your RV. You can also check the status and signal strength of your sensors using the diagnostic mode, which will help improve the accuracy during installation.
It will alert you of any errors or calibration issues with various display codes, and the codes are explained with suggested solutions in the user's manual. This monitor installs easily, just cut a hole for this recessed mount monitor and screw into place with the included screws that you see here. This includes the pigtail that I have already attached needed for installation, and the existing wiring from your old tank monitor system can also be used for ease of installation. Now, this is going to be for a three holding tank setup with the multiplex systems. And let me pull out my ruler here and just give you some overall dimensions.
The overall width, we're sitting right at four inches, the overall height, we are sitting right at 2 7/8 inches, the overall depth, and I'm including the plug of the pigtail, we're gonna be sitting right at an inch deep. And the operating temperature range is gonna be from 32 degrees Fahrenheit to 140 degrees Fahrenheit, the operating voltage range is gonna be from 11 volts to 16 volts. And the SeeLeveL monitors come in a variety of configurations depending on your specific requirements. Consult the chart on this product page to make sure that you get the monitor that you need. If you are replacing an old tank monitoring system, you'd wanna check with the functions that are being provided by the existing panel. Some models incorporate switches for pumps or heaters or providing information on propane levels, you'd want to pick the SeeLeveL monitor that can provide for all of those features. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Get advanced tank monitoring for your advanced RV. This monitor is compatible with multiplex, RV-C systems so you can get improved readings at your primary control panel. Accurately tracks 3 holding tanks using SeeLeveL sensors (sold separately).
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.