SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black, Galley - Water Pump Switch

Video Transcript for Review of SeeLeveL Smart RV - RV Holding Tank Monitor Fresh Gray Black Galley Tank - SE24VR

Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at this SeeLevel RV holding tank monitor for fresh, gray, black, and galley tanks with the integrated water pump switch. If your RV tank monitor's readings change from 25% to empty in the blink of an eye, that is a problem. This monitor uses SeeLevel sensors, which are sold separately, for single digit accuracy. This SeeLevel tank monitoring system uses technology that can sense fluid levels from the outside of the tank, and the sensors flexible circuit board sticks in place and measures along the entire height.

This makes it accurate in single digit increments. Now this monitor displays the levels of your RV's fresh, gray, black, and galley tanks at the push of a button. It can also display your battery voltage. This can activate your water pump with this integrated switch, and the three way function lets you connect to switches in your bathroom, kitchen, or elsewhere. This works with multiple monitors so you can check tank status from the service bay and inside your RV.

You can also check the status and signal strength of your sensors using the diagnostic mode, which will help improve accuracy during installation. It will alert you of any errors or calibration issues with various display codes. And the codes are explained with suggested solutions in the users manual. Now this monitor installs easily. You would just cut a hole for this recess mount monitor, and then screw into place with the included screws that you see here.

This does include the pigtail needed for installation, and the existing wiring from your old tank monitor systems can be used as well to ease the installation. Now this is for four holding tank systems. Let me pull out my ruler here, and just give you some overall dimensions. Looking at the overall width, we are sitting right at four inches. And then the overall height, we're sitting right at two and seven eighths inches tall.

And then looking at the depth, I'm gonna be including this plug for this pigtail. We're gonna be sitting right at an inch deep. Now the operating temperatures, operating temperature range rather, is gonna be 32 degrees Fahrenheit to 140 degrees Fahrenheit. The operating voltage range is from 11 volts to 16 volts. Now SeeLevel monitors come in a variety of configurations depending on your specific requirements. Consult the chart on this product page to make sure that you get the part, or get the monitor that you need. If you are replacing an old tank monitoring system, you'd wanna check which functions are being provided by the existing panel. Some models incorporate switches for pumps or heaters or providing information on propane levels. You'd wanna pick the SeeLevel monitor that can provide for all of those features. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..