SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Water Pump Switch
(6 reviews)
Price: $159.09
In Stock
SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Water Pump Switch
Item # SE44VR
Our Price: $159.09
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
SeeLeveL Smart RV - SE44VR
- Monitoring System
- Water Pumps
- Water Tanks
- Digital Display
- SeeLeveL
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveL sensors (sold separately) for single-digit accuracy. Also displays battery voltage and features a water pump switch.
Features:
- Monitor displays the levels of your RV's fresh, gray, and black tanks at the push of a button
- Hardwires to SeeLeveL sensors (sold separately) mounted on the outside of the tanks
- Also detects battery voltage
- Activates water pump with integrated switch
- 3-Way function lets you connect to switches in your bathroom, kitchen, or elsewhere
- Checks status and signal strength of sensors using diagnostic mode
- Helps improve accuracy during install
- Alerts you of any errors or calibration issues with various display codes
- Codes explained with suggested solutions in user's manual
- Works with multiple monitors so you can check tank status from the service bay and inside your RV
- Installs easily - cut hole for recessed mount monitor and screw in place
- Includes pigtail needed for installation
- Existing wiring from your old tank monitor system can be used to ease install
Specs:
- Application: 3 holding tank systems
- Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep
- Operating temperature range: 32 F - 140 F
- Operating voltage range: 11V - 16V
- 1-Year limited warranty
Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
Advanced RV Tank Monitoring
Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.
The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.
Get the Model You Need
SeeLeveL monitors come in a variety of configurations depending on your specific requirements.
| Model | Fresh | Gray | Black | Galley | Propane | Water Pump Switch | Water Heater Switch | Bluetooth | Multiplex Compatible |
|---|---|---|---|---|---|---|---|---|---|
| SE94VR | ✔ | ✔ | ✔ | ||||||
| SE34VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE44VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE64VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE74VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| SE67VR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| SE37VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE47VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE97VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE84VR | ✔ | ✔ | ✔ | ✔ | |||||
| SE24VR | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| SE57VR | ✔ | ✔ | ✔ | ✔ | ✔ |
If you are replacing an old tank monitoring system, you'd want to check which functions are being provided by the existing panel. Some models incorporate switches for pumps or heaters or are providing information on propane levels. You'd want to pick the SeeLeveL monitor that can provide for all of these features.
709-P3 Garnet Instruments SeeLeveL RV 3 Tank Monitor Display - Fresh, Grey, Black Tanks - Battery Voltage Monitor - Water Pump Switch
Installation Details
Video of SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Water Pump Switch
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of SeeLeveL Smart RV - Monitoring System - SE44VR
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the SeeLeveL RV Holding Tank Monitor for your fresh, gray, and black water tanks, and it comes with the water pump switch. Now, if your RV tank monitor readings will change from 25% to empty in just a blink of an eye, that could be a problem. So with the SeeLeveL Holding Tank Monitor, you could able to display the levels of your RV's fresh, gray, and black tanks with just the push of a button. This does hard-wire to the SeeLeveL sensors that are mounted on the outside of the tanks to give you a single digit accuracy. Those sensors we do sell separately on our website.
This will also display the battery voltage if you push that button, it'll show your battery voltage right there, and with that switch, you can activate your water pump. It's a three-way function switch that'll let you connect to switches in your bathroom, kitchen, or elsewhere. This will check status and signal strength of the sensors using a diagnostic mode, and it'll help improve accuracy during your install. This will also alert you of any errors or calibration issues with the various display codes it'll show, and the codes are basically explained with suggested solutions in the owner's manual. And this does work with multiple monitors, so you can check the tank status from the service bay or inside your RV.
And it does install very easily, all you have to do is cut a hole for the recessed portion to fit into, and then screw it in place with the included hardware. Basically, that recessed portion, if we measure that, it's gonna be right at three inches by 1 3/4 inches by about 3/4 inches, that would be your cutout amount that you would need to have this drop into place. If you noticed, it does include this pigtail needed for installation. Basically, that would just plug in the back there and then wire it to your installation. Now, you can use the existing wiring from your old tank monitor system to help ease the installation.
Application again for this is three holding tank systems, a fresh, a gray, and black water. Operating temperature range, 32 degrees Fahrenheit to 140 degrees Fahrenheit, and the voltage range is 11 volts to 16 volts. Last thing I'm gonna do is just give you the measurement of the monitor itself, It's gonna be four inches wide by 2 13/16 inches tall, and your total depth from the whole thing is gonna be right about 3/4 of an inch. But that should do it for the review on the SeeLeveL RV Holding Tank Monitor for the fresh, gray, and black water tanks with the water pump switch..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Water Pump Switch - SE44VR
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveL sensors (sold separately) for single-digit accuracy. Also displays battery voltage and features a water pump switch.by: Richard Crane01/15/2024
I used one of these in another trailer and love it. That’s why I bought one for the trailer I am currently rebuilding. I had a sender problem with one tank and their customer service was wonderful helping me find a solution to the specific problem that existed.
by: John W08/12/2023
replaced the WGO OEM panel with this one as it had all the options that I needed and fit nicely into the same area... as with the sensors, it was an easy single-wire install (for the sensors) and gives a much more accurate indication of the tank status'... would highly recommend this product!
by: Jo04/25/2022
Installation was easy and so happy my monitor could be replaced. Very satisfied with your company.
by: Scott 09/01/2022
Great price, fast shipping
by: Glenn 07/15/2023
Very good
by: Mike 01/22/2023
6
6
See what our Experts say about this SeeLeveL Smart RV
- Can SeeLeveL Sensors Work with Redarc RedVision Total Vehicle Management SystemThe SeeLeveL Sensor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE44VR and won't work with the Redarc RedVision Total Vehicle Management System with Manager30 # RED79FR. The Redarc setup is meant more for monitoring and capitalizing on power usage while the SeeLeveL system is meant to monitor tank levels. There is a little crossover in that the SeeLeveL monitor can detect battery voltage, but that's about it - nothing near what the Redarc can do.
view full answer... - Recommended Holding Tank Sensor Monitor For An RVIt definitely is a guessing game when it comes to filling your holding tanks. For a much more accurate reading of the water level in your black tank, as well as your fresh and gray, you can install the SeeLeveL RV Holding Tank Monitor # SE44VR. These strips simply stick onto the outside of of your holding tanks and have sensors every inch instead of just the old 1/3, 2/3, 3/3 type sensors that manufacturers install in their RV's. Because there's more sensors on these strips the reading...
view full answer...
Do you have a question about this Smart RV?
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Edited by:
Amanda M
Written by:
Cody B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.