Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet - Black Plastic
(307 reviews)
Price: $11.25
In Stock
Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet - Black Plastic
Item # T1028
Retail:$22.67
Our Price: $11.25
You Save: 50%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (307)
- Q & A (0)
- Photos
Valterra RV Sewer Hose Fittings - T1028
- Sewer Adapters
- Sewer Pipe Adapters
- 3 Inch Diameter
- Sewer Pipe to Waste Valve
- Bayonet
- Hub
- Valterra
Adapter converts RV waste valve to connect to 3" hub sewer pipe. The bayonet fitting rotates, making it easy to connect to the lug fitting on your RV's waste valve. And the 3" hub slides over the sewer pipe.
Features:
- Adapter connects your RV's waste outlet to a rigid sewer pipe
- Rotating design makes it easy to connect to RV's waste valve
- 3" Hub end slides onto sewer pipe
- Bayonet fitting secures to lug fitting on waste valve of black-water tank
- Fits 3" waste valves
Specs:
- Overall length: 3-3/4"
- Adapter base length: 3"
- Inner diameter:
- Fitting pipe: 3-1/2"
- Adapter end: 2-3/4"
- Outer diameter: 4"
- 1-Year warranty
This sewer pipe adapter can be used to connect a rigid pipe to your motor home's waste management system.
T1028 Valterra Rotating Adaptor for Rigid Motor Home Drain Pipe - 3" Hub and 3" Bayonet Ends
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet - Black Plastic - T1028
Average Customer Rating: 4.9 out of 5 stars (307 Customer Reviews)
Adapter converts RV waste valve to connect to 3" hub sewer pipe. The bayonet fitting rotates, making it easy to connect to the lug fitting on your RV's waste valve. And the 3" hub slides over the sewer pipe.by: Rick P.07/20/2023
Want to get rid of two separate sewer hoses because your camper has two dump ports. These items can make it easy to convert to solid pvc piping to combine two hose connections into one. Makes everything look neater and be more sanitary. All it took me was two item T-1028 and one item T-1029-2 rigid pipe fittings from etrailer to do it. These items are high quality and easy to install, and not expensive at all. All it takes is these adapters and some pvc fittings and a afternoon of easy assembly. Hopefully the pictures show enough to help anyone tackle the change. You'll really be glad you did. By the way, etrailer seemed to be the only place I could find these. But then they always have the best selection, prices and shipping.
by: Michael03/14/2024
Works as it was designed to. 5th wheel is now parked permanently.used it to plum sewer permanently. Just remember to used the "green" glue for attaching pvc to abs.
by: Rodney02/09/2024
I bought adapter so that we could go to
the Waste Master cam lock system. My RV is still under warranty. So I don't want to change the factory hook up.
This adapter allow me to glue abs pipe to it to glue to Waster Master cam lock
setup. Also rotating hook up is detachable from RV in the event of cam lock hose problems. Then a bayonet style hose can be used to drain tanks.
Also with camlock on the outside of bay
It's easy to hookup. I don't have to get on the ground to reach up to pull hose up to bay floor.
by: Michael03/15/2024
They look good but e trailer asked for a review as soon as they arrived so I have no idea how well they will work or if they are going to fit , kind of strange
by: Sue11/23/2016
Excellent product! I am leaving my trailer at the trailer park on a permanent basis and used the product to attach to the sewers with ABS pipe, so it would be more durable than the flexible hose. After I had glued the pipes together to the adapter, I was able to connect to the park sewers and then the rotating bayonet hooks made it easy to attach the whole assembly to the trailer. Thank-you.
by: Dwight 03/20/2023
Use them a lot. They work well
Dwight
3/21/2024
Working well. Had someone put a brace under their pipe and it raised the fitting enough to make it leak. Any pipe brace has to fit loosely but close enough to stop downward pressure when dumping
by: Timothy 05/06/2024
Easy order process and good prices. The shipping was fast as well.
by: Dwight 04/27/2024
Use them always. Never a problem with the product just people putting pressure up on the extended pipe. Let it fall a very little bit to help the gasket seal
by: Steve05/08/2024
Delivery was late!! I needed it 24 hours ago. Other than that, it was good.
by: Tina04/28/2024
Fits tight with no leaks thanks to the inner lip.
by: Jesse R 03/26/2019
Best $ I’ve ever spent
Was as described in the pictures & specs
No problem hooking up
Got the job done
Thanks etrailer!!!!!
Jesse R.
3/27/2020
A year later an this product is still at it This is a must have thanks again etrailer!
by: Patrick 05/27/2023
Works as expected, to glue rigid ABS pipe onto a seasonally stationary RV in place of a flexible sewer hose. This item attaches to the RV's sewer outlet like a standard flexible sewer hose would, and then you glue the ABS pipe to the other end of this item. The other end of the ABS then threads into the RV Park's sewer riser.
by: Terry 04/12/2024
Very pleased with the product and arrived a day earlier than expected.
by: Rick01/24/2022
Love this attachment, works as its suppose to and makes it easy for me to disconnect the PVC from the RV at the outlet without having to dismantle the PVC to the ground drain.
I like to backwash my tanks about once a month so this attachment allows me to complete that process easily since I have to remove the PVC for the backwash attachment.
5 stars for me.
by: Erick09/30/2023
The 3 inch side for pipe does not really fit a 3 inch pipe it is super lose and requires a lot of quick drying glue to hold the 3 inch pipe in the cupler side
Katrina D.
10/11/2023
I have pulled some of these and measured them. I do see that the inner fitting of the pipes diameter is 3.50 inches. I have sent some extra measurements to add to our site.
by: Tim11/24/2017
OK got the new fitting today, very excited. Took about 5 minutes to glue my pipes together and boom no more dealing with nasty flex pipe for sewer. The 3" Pvc pipe hooked up.
by: Roger 07/20/2023
I haven't used it yet but it is exactly what is needed to finish hooking up our sewer line to the septic tank we put in, thanks
by: KamperDood06/01/2023
Product works as expected. BUYERS TAKE NOTE! This will only accept schedule 40 pipe! Thin wall schedule 30 drain pipe will not work. Would have been great info to have prior to purchase. Valterra should update their info. Overall great product tho. No fault by eTrailer.
by: Gregory01/15/2021
Perfect fit for my application, connecting RV bayonet connection to macerator . Good quality, 4 tabs instead of 2 make it more durable.
by: Collin K07/14/2022
Worked like champ, solved all my septic issues!
Shipping was very fast!
Collin K.
7/15/2023
Still working perfectly! Thanks!
by: Mr James11/05/2023
Works as designed.
by: Thomas 01/14/2021
I received the exact parts I needed in record time. I am extremely pleased with my first purchase from E Trailer and plan on making another purchase today. I highly recommend this company as they reached out with personal emails to inform me of the status of my order, something unheard of these days.
Thomas W.
1/15/2022
Great! Perfect fit and easy to install. Highly recommend it!
by: William Tacker10/12/2016
Excellent part is exactly as advertised and the price was right, I will definitely be using you again in the future
Thank you very much
by: Ricky01/30/2022
Works well so far.RV is in a permanent position and was unable to find a product like this locally.Thanks for the quick shipping.
Ricky
1/31/2023
Still working as it should
by: Michael 07/18/2023
Great customer service and fast delivery
25
306
Show More Reviews
See what our Experts say about this Valterra RV Sewer Hose Fittings
- Glue to Use to Connect RV Sewer PipeWhen gluing together Valterra RV sewer pipes like the # T1028 you'd need to use an ABS solvent cement like the part # A05-0303.
view full answer... - Can the Valterra Rotating Sewer Adapter Be Temporarily InstalledThe Valterra Rotating Adapter for Rigid RV Sewer Pipe part # T1028 is designed to be welded to the end of a 3" ABS sewer pipe. However, if you don't want to permanently attach the sewer pipe to the hub fitting you could most likely just use a gasket maker like part # LT37467 to stop any leaks.
view full answer... - Will LaSalle Bristol RV Sewer Termination Adapter Connect to 3" PVC Pipe The LaSalle Bristol RV Sewer Termination Adapter # 34466V293B3S is designed to slide into a larger hub like what you see on the end of # T1028 and secured using ABS Solvent Cement # 3447530889. The inner diameter on the hub should be about 3-1/2 inches. If this is what is on the PVC pipe that you mentioned then it will work great. I don't recommend connecting it directly to another 3 inch diameter PVC pipe though, as this might not allow for the best connection even when using a healthy...
view full answer... - Could Valterra Rotating Adapter for Rigid RV Sewer Pipe Fit Schedule 20 and 40 Sewer PipeThere is Schedule 20 and 40 sewer pipe that has an outer diameter of 3-1/2 inches like what the Valterra Rotating Adapter for Rigid RV Sewer Pipe # T1028 is designed to work with so yes it would fit if the size was correct.
view full answer... - Fittings Needed To Go From 3" MPT Threaded Sewer Pipe To 3" Bayonet Fitting You'll first want to attach the LaSalle Bristol Clean Out Adapter for RV Sewer System # 344633703 to your current setup and then you can attach either the Valterra RV Sewer Termination Adapter # T1029-2 or the Valterra Rotating Adapter for Rigid RV Sewer Pipe # T1028 to the unthreaded side of the # 344633703 with some Valterra ABS Solvent Cement # A05-0303
view full answer...
- Replacement Gasket for Valterra Bayonet Sewer FittingFor replacement gaskets for the bayonet side of the Valterra fitting # T1028 you'd want to use the part # CAM39834.
view full answer... - Semi-Permanent RV Sewer Connections Made To Septic and Fresh Water Supply Needed - 75 FeetYour fresh water hose is an easy recommendation, I suggest the Camco RV drinking water hose, 5/8" diameter at 75' Long, # CAM22803. This is a reinforced PVC hose for drinking water made of FDA-approved materials and BPA-free. Because you state that you are new to RV living I will make the suggestion that you also use a water pressure regulator, I suggest the Camco RV Water Pressure Regulator, # CAM40055. Please see the attached video for a visual of product. Because inconsistent water...
view full answer... - Flange and Gasket for Installing RV ToiletThough we do not carry either of those parts I can still help you out. What you are going to need - depending on how your hose threads - is either the RV Toilet Floor Flange # T05-0784, which has 3" diameter female pipe threads OR RV Toilet Floor Flange # T05-0782, which has 3" diameter male pipe threads. Additionally you will need the RV Toilet Floor Gasket with Hold Down Bolts # Q23653VP which is a universal design that works with the flange.
view full answer... - Valterra Rotating Adapter for Rigid RV Sewer Pipe to Permanently Connect to Septic StationYou will need the Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet - Black Plastic item # T1028 and a 4" to 3" adapter that you can find at your local hardware store to permanently connect your camper to you septic station.
view full answer... - Parts Needed To Make 1-1/2" Waste Valve With 3" Bayonet OutletI do have a way for you to get what you want, but that's not something that's made. You'll need a few parts: Waste Valve # T1001 Adapter # T1041-1 Bayonet Adapter # T1028 ABS Glue # A05-0303 You mentioned PVC but your 1-1/2" Grey water pipe should be black ABS plastic per RVIA regulations and not PVC however. You'll connect the waste valve to hub end to your existing pipe, the adapter to the other end of the waste valve, and the bayonet adapter to that adapter.
view full answer... - Solution To Go From A 1-1/2 Inch Hose Fitting To A 3 Inch Bayonet FittingWe have the LaSalle # 34466V153 which will slide on over your 1-1/2" pipe to give you 3" pipe. From here you can use # T1028 to give you the bayonet fitting you're needing. Use the solvent cement # 3447530889 to complete installation and prevent leaks.
view full answer... - Can A 3 Inch Pipe Be Attached to the Valterra Adapter for RV Sewer Hose Part # T1025VPThe Valterra Adapter for RV Sewer Hose part # T1025VP has a bayonet fitting on one end and then a tapered fitting on the other end. There would be no way to attach a 3" pipe to the tapered fitting but what you could do is combine the Valterra Street DWV Fitting part # D50-2892 and the Valterra Rotating Adapter part # T1028 to provide a bayonet fitting on one end and then a hub fitting on the other which you would then slide a 3" pipe into. Please note, RV's use ABS pipe construction not...
view full answer... - 20 Foot Cleanout Hose With Adapters For RV I might have a solution for you, however, we do not have a 60' hose like requested. Instead, we have the EZ Flush Replacement RV Sewer Hose with 3" Bayonet Fitting # D04-0087 which is 15 mil thick, and is 20' long. With this hose, you'll need # 344633703 to connect to your RV's cleanout, and use # T1028 on the smooth end of # 344633703. This setup will allow you to connect # D04-0087 to your RV's cleanout. Additionally, you will need some solvent cement # A05-0303 to secure # 344633703...
view full answer... - Needing a Rotating Adapter for Rigid RV Sewer PipeYes, of course you can insert and glue the Valterra Rotating Adapter for Rigid RV Sewer Pipe, # T1027 if you choose to. If your objective is to have a permanent/semi-permanent arrangement of your RV to a sewer system, I suggest the Valterra Rotating Adapter for Rigid RV Sewer Pipe, # T1028. This adapter converts an RV waste valve to connect to 3" hub sewer pipe. The bayonet fitting rotates, making it easy to connect to the lug fitting on your RV's waste valve and the 3" hub slides over...
view full answer...
- How to Connect an RV Waste Sewer Hose to a Portable Tote Tank with Threaded FittingI think I'm following you. It sounds like your portable tote tank has a threaded fitting, but your sewer hose has a bayonet fitting like a typical sewer hose. If that is the case, then I have a solution for you, but we don't have a single adapter. Instead, you will want to use fitting # T1029-2 and fitting # 344633703 to make the adapter you need. The non-threaded end of part # 344633703, will fit into the end opposite of the 3 bayonet lugs on part # T1029-2. You will want to use ABS...
view full answer... - Does Valterra T1028 Rotating Rigid Pipe Adapter LeakMost likely the issue is related to the glue you used for your application. PVC and ABS require different glue types so you should verify that you used the correct glue for your application. If that's not the issue the problem is possibly the wrong size fitting.
view full answer... - Recommended Bayonet Flange For Waste ValveFor the bayonet fitting on your valve, you can use the Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet - Black Plastic # T1028, the Valterra Adapter for RV Sewer Hose - 3" Bayonet Fitting - Straight - Black # T1024VP, or the Valterra Hose Adapter w/ 3" Swivel Bayonet Fitting - Black # T1024-2VP. For the other side of that bayonet, you may be interested in the Valterra RV Sewer Lug Fitting with Flange - 3" # T1009, the Valterra RV Sewer Termination Adapter - 3"...
view full answer... - 1-1/2 inch Gray Tank to 3 inch Bayonet Fitting Adapter RecommendationWe have the LaSalle Bristol Eccentric Tank Reducer # 34466V153 which can slide over your 1-1/2 inch diameter gray pipe to give you a 3 inch pipe that you could then attach the 3 inch pipe to 3 inch bayonet adapter part # T1028 and you'd be set.
view full answer... - Parts Needed To Add A 3" Bayonet Fitting To An RV Sewer SystemHey Brad, I would not use a rubber boot to connect to the # T1027. It would likely leak and wouldn't be stable enough for you to fully connect it to a waste hose, which could end up causing quite a mess. Instead you could use the # 344632893, which has a 3" hub side to glue # A05-0303 onto the pipe that you already have and a threaded side to screw the # T1027 into. You could also just glue on the # T1028 if the pipe is already sticking out far enough for you to connect your waste hose.
view full answer... - Fitting and Adapter for Waste Pump Sewer Pipe The Valterra Rotating Adapter for Rigid RV Sewer Pipe - 3" Hub to 3" Bayonet # T1028 is designed to fit onto a 3" waste valve with the bayonet fitting and the 3" hub will slide onto the sewer pipe so you can have your sewer pipe go between this adapter and the pump. There are other adapters, but they are all going to depend on the fittings you have. For example, the Clearview Adapter for RV Sewer Hose # T1026-1 is a clear and has a 45 degree angle, but uses 3" bayonet and lug fittings,...
view full answer...
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Amy B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Suzanne R.
11/23/2017
After a year, it works just as well as it did last year.