Pollak 7 Pole to 4 Way Connector Adapter

See what our Experts say about this Pollak Trailer Wiring

• Trailer Hitch Receiver and 7-Way Vehicle Wiring Harness For a 2023 Ford Ranger
  Yes, we do have both. I recommend using the etrailer Trailer Hitch Receiver # e63ZR on your 2023 Ford Ranger. This receiver is made in the USA and comes with a lifetime warranty. It is rated for up to 6,000lbs trailer weight and 900lbs of tongue weight. If you are using with a weight distribution hitch trailer weight increases to 8,000lbs. Do be sure to not exceed any towing capacities given by Ford for your Ranger. The Curt T-Connector Vehicle Wiring Harness # C56431 will give you a...
  view full answer...
• Trailer Hitch Receiver and Vehicle Wiring Harness Confirmed To Fit a 2024 Hyundai Santa Cruz
  Yes, we do have the Curt Trailer Hitch Receiver # C23WR which has been confirmed to fit your 2024 Hyundai Santa Cruz. I do recommend also installing the Curt T-Connector Vehicle Wiring Harness # C68JR when you install the receiver. This will give you the larger 7-blade connection or you can use the Adapter # PK12716 if you are towing a smaller trailer with only a 4-way flat connector.
  view full answer...
• Comparing Curt and Draw-Tite Trailer Hitch Receivers for 2017 Chevrolet Traverse
  The only significant difference between the Draw-Tite # 75528 and the Curt # 13424 is the capacity. Since both of these far exceed the towing capacity of your vehicle that really doesn't make a difference. If I were to recommend a hitch for your 2017 Chevy Traverse it actually wouldn't be either of these. Instead, I would choose the etrailer Trailer Hitch Receiver # e98863. This hitch has the same design and capacity as the Curt. What sets it apart from the other two is the matte black...
  view full answer...
  
• Parts Needed For 7-Way and Brake Controller On 2022 Ford Bronco
  It sounds like you want to install the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK55VR on your 2022 Ford Bronco. This will add a 7-way wiring connection and also includes a wiring harness to install a brake controller should you need one. If you think you might tow a trailer with a 4-way, I also recommend grabbing the Pollak 7 Pole to 4 Way Connector Adapter # PK12716. If you aren't towing a trailer with brakes, there is no need to add a brake controller....
  view full answer...
• 7-way to 4-Way Adapter Recommendation for a Pre-Wired 2016 VW Tiguan S
  For a simple 7-way to 4-way adapter you would want the part # PK12716. This will plug right into the 7-way you sent in a picture of and will provide you with a 4-way. Since your tow vehicle is a 2016 Volkswagen Tiguan you may need to use the # C35FR. This adapter would be needed instead if your trailer has LED taillights on it.
  view full answer...
  
• 4-Way Trailer Wiring Harness Recommendation for a 2013 Audi Q7
  Your 2013 Audi Q7 should have a factory 7-way installed on it. To install a 4-way inline with the 7-way harness you would want the # 118384. Or for a 4-way adapter designed to plug into the 7-way you would want the # PK12716.
  view full answer...
• Recommended 7-Way and 4-Pole Trailer Wiring Harness for 2018 Honda Pilot
  The easiest way to have both a 4-pole and a 7-way trailer connector for your 2018 Honda Pilot would be to begin by installing a 7-way trailer connector, part # 118286 and then use an adapter like # PK12716 when you want to tow a trailer with a 4-pole connector. I've linked to videos for both these products. There's an alternative if you'd rather not mess with an adapter. You can use a T-harness like part # 118384 which would plug inline between the 7-way and the harness provided by the...
  view full answer...
• Trailer Hitch Receiver and Vehicle Wiring Harness For Trailer Towing With a 2019 Nissan Pathfinder
  When we installed the etrailer Trailer Hitch Receiver # e98908 on a 2017 Nissan Pathfinder in our shop we ended up with a receiver height of 13" to the inside top of the receiver tube. As all trailers will be different heights for the coupler you will want to measure the coupler height of your trailer to determine the most appropriate ball mount for your 2019 Nissan Pathfinder. I recommend the Rapid Hitch Adjustable, Aluminum Ball Mount Kit # AM3462 if you are unsure of what trailers...
  view full answer...
• Lighting Kit for 2013 Jeep Wrangler Unlimited When Thule 4-Bike Hitch Rack is in Use
  Often a loaded bike rack can block a substantial portion of a vehicle's rear lighting so adding supplementary lighting to your 2013 Jeep Wrangler Unlimited when you are using your Thule 4-bike hitch rack is a sensible safety-conscious notion. The simplest and most cost-effective method to add lighting to your Wrangler is to use a kit designed for use with tow bars (as when vehicles are towed by a motor home) such as the Optronics # TL21RK. These heavy-duty lights feature magnetic bases...
  view full answer...
• Troubleshooting Tail Lights and License Plate Light on the LED Trailer Light Kit # TLL56RK
  There are a few things that you can do to troubleshoot your wiring situation and hopefully get you back out there to fish. You will want to start off by checking the connector on both your trailer and your 2005 Chevy Trailblazer as well as the connectors on your adapter. Make sure they are clean and free of any dirt or debris. If that looks good then you will want to check all of your grounds to make sure they are connected to a clean, bare-metal surface. If the adapter that you are using...
  view full answer...
  
• Tow Bar Wiring For A 2012 Toyota Camry
  If you are looking for a wiring kit that does not require splicing into the factory wiring on your 2012 Toyota Camry we do have magnetic light kits available I recommend Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless Item # C6304. This kit is magnetic and wireless. A wireless transmitter plugs into your RV and the magnetic lights are mounted on the trunk of the vehicle. If your motor home has a 7 pole plug I recommend Pollak 7 Pole to 4 Way Connector Adapter...
  view full answer...
• Wiring 4 Wires on Trailer to 7-Way Connector
  Most likely on your trailer the brown wire is for running lights, the green wire is for right turn/brake light, the yellow is for left turn/brake, and the white wire is for ground. Because previous owners or trailer manufacturers may have installed different color wiring than what is standard, it is always a good idea to test the wires for function to be sure. You can apply 12V power to the trailer wires to see what function each of them activates. If you are wiring these to a 7-Way connector...
  view full answer...
  
• Adapter for 7-Pin Harness on Vehicle to 4-Flat Harness on Trailer
  There are no diagrams available for this as you would need to find the functions of the wires with a circuit tester. However, there is a much easier way to connect your trailer's 4 flat to your vehicle's 7 way with the use of a simple adapter. So long as your connectors look like the ones in the accompanying photo you can use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716, which plugs into your 7 blade and then you plug in your 4 flat. I've added a link to a video review of this...
  view full answer...
  
• Will 4-Flat and Tow Bar Wiring Both Work on 2018 Jeep JL Wrangler Unlimited
  The Curt T-Connector Vehicle Wiring Harness # C56407 and Tow Ready 118821 will absolutely work together on your 2018 Jeep Wrangler JL Unlimited to give you a 4-way at the rear of your Jeep to tow your trailer and at the front to flat tow. The reason for this is the Curt connector will plug into the tail light housing while the Tow Ready will splice in; I recommend starting with the Curt and then installing the Tow Ready. The other option if you wanted to make things really simple is to...
  view full answer...
• Dealer Installed 7-Way Trailer Connector Does Not Work on 2012 Volkswagen Tiguan
  It actually does not make sense because a 7-Way trailer connector also has combined brake light and turn signals so unless the adapter you bought is something out of the ordinary it is not the issue. The issue on many newer German vehicles is when you are towing a trailer with LED lights, the power draw is not sufficient for the OEM trailer wiring. What is needed is a special adapter, # C35FR, that adds extra resistance so you do not get the bulb out warning and the lighting on the trailer...
  view full answer...
• How Do I Convert My 2006 Toyota Sequoias 7-Way Connector to a 4-Way Connector
  All you would need is a Pollak 7 Pole to 4 Pole Connector Adapter, part # PK12716, to connect your 4 pole boat trailer to your 7 pole 2006 Toyota Sequoia. You will simply plug your 4 pole trailer connector into the Pollak 7 Pole to 4 Pole Connector Adapter, part #, PK12716 and then plug that into your Sequoias 7 pole connector and you will be good to go.
  view full answer...
• Trailer Wiring Upgrade for Dodge Truck from 4-Way to 7-Way to Pull Trailer with 7-Way Connection
  For your friend's Dodge with 4-way flat, you will need the Adapter 4-Pole to 7-Pole and 4-Pole # 37185. This will simply connect to the 4-way flat giving you the functions of running lights as well as brake lights and turn signals on the trailer. You will need to connect the grounded ring terminal wire for these functions to a bare metal surface. What it will not have unless you connect the remaining 3 wires on the adapter is the electric trailer brakes (blue wire), reverse lights...
  view full answer...
• Does the Ford Brake/Tail Light Trailer Hitch Cover Plug Into a 4-Way Flat Vehicle Side Connector
  The Trailer Hitch Cover, # CR-007F, does come with a 4-Way connector that will plug into a 4-Way flat receptacle on the 2009 Ford Explorer. If your Explorer did not come with a trailer connector you would first need to add one using # 119178KIT. I have included a link to the installation details for the wiring harness. If your Explorer came with a 7-Way trailer connector but no 4-Way connector, you would need to use an adapter like # PK12716, to convert the 7-Way to a 4-Way for the lighted...
  view full answer...
• Troubleshooting Left Turn Signal Problem When Using 7 to 4-Way Wiring Adapter PK12716 on a 2006 GMC
  To determine where the problem is occurring, I would use a circuit tester to check for function at a couple different points. You will either need to leave on the turn signal in the cab of your truck, or have a helper operate it for you. We offer circuit tester # PTW2993 if needed. First, without the adapter or trailer connected, you can make sure that the left turn signal is reading correct at the 7-Way plug on your 2006 Sierra. The left turn signal is normally located at the second blade...
  view full answer...
• Comparing EcoHitch and OEM Hitch to Curt and etrailer Hitches on 2022 Subaru Ascent
  I'll start with the EcoHitch Invisi Trailer Hitch Receiver # 306-X7381. The price on any EcoHitch comes from the material used in the construction of the hitch. It uses a special alloy made of recycled materials and combines aluminum, steel, and stainless steel. You are right about the OEM hitch too, a lot of times they come with a wiring harness. On some vehicles if you get it with the OEM hitch the bumper may also be different to allow for an OEM look. For your 2022 Subaru Ascent that...
  view full answer...
• Recommended Flat Towing Setup For 1982 Jeep CJ-7
  I would be happy to recommend a flat towing setup for your 1982 Jeep CJ-7. Since the only base plate kit confirmed to fit your Jeep is the Demco Classic Base Plate Kit # DM9518112 which will work with the standard front bumper, you will not be able to use the Roadmaster StowMaster Tow Bar # RM-501. Luckily there are other tow bars out there that will work great with this base plate kit. I recommend using the Demco Commander II Non-Binding Tow Bar - Victory Series # DM9511012 which has...
  view full answer...
• Wiring a 7-Way for 12 Volt Power to Maintain a Trailer Battery Towed by a 2011 Chevy Colorado
  The wiring on a vehicle and in a trailer connector is not sufficient to up-charge a trailer battery unless it is a smaller break away battery. The wiring can maintain the current charge level on the battery but a battery charger is recommended to up-charge the battery. Since your truck does not already have a 12 volt wire at the back, you will need to hardwire one from the adapter you have to the positive terminal on the battery via a 40 amp circuit breaker # PK54540 and using about 20...
  view full answer...
• Towing Trailers with a 4-Way and a 7-Way Connector with a 2018 Ford F-150
  You can use an adapter, like the Pollak # PK12716, and it's a cost-effective option but certainly not the most convenient. You have to change the adapter everytime you change trailers. A better long term solution is to change out your current 7-way for one that has both 4- and 7-way connectors, like part # HM40975. If you unplug the 7-way you have there should be a wiring harness with a plug that looks like what's in the picture I attached. The Hopkins # HM40975 will plug right into...
  view full answer...
  
• Can A 7-Way RV Trailer Connector Be Used with only 4-Way Wiring Installed on a 2008 GMC Acadia
  Yes, you can use a 7-Way RV wiring harness on your 2008 GMC Acadia without tow package. You will first need to install the T-One Vehicle Harness with 4 Pole Trailer Connector, item # 118451, which will plug inline with your vehicle tail lights, see instructions and video link. You will then need to install an adapter like # 37185. This adapter will plug into the 4-Way connector previously installed and the extra wires can be tied up out of the way for future use. A bracket is included for...
  view full answer...

Do you have a question about this Trailer Wiring?