Summer Starts Here - Save up to 70%
2-1/2" Diameter beehive. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Durable polycarbonate housing. Mounts to trailer with grommet (not included). Accepts standard 2-prong plug. P2 rated.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # LED7250A
Truck Lite # 10276Y
Grote # 47223
Maxxima # M10201Y
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to be taking a look at part number MCL23AB. This is the Optronics sealed beehive amber LED trailer clearance and side marker light. It can also function as a rear tracking light. It's going to feature a sealed waterproof housing and lens design. It's going to contain eight LEDs or eight diodes. That LED is going to make great replacements for incandescent lights.
They are going to burn brighter, last longer and they are going to be much more efficient. You don't have to worry about replacing the bulbs and you don't have to worry about burned out filaments. This unit is designed to accept the industry standard 2-prong plug that is going to be sold separately, but it makes it very simple to upgrade from incandescent lights. It's also going to mount with a mounting grommet and that is going to be sold separately as well, but you can find all those items here on our website. If we take a look at the overall diameter, I am going to measure here at the back because that is going to be the widest point. That is going to give us a measurement of about 2 1/2 inches.
The overall depth is, I'm going to give is a measurement, about 2 5/16 of an inch. The light is going to draw 0.061 amps at 12.8 volts. It is SAE and Department of Transportation compliant and Optronics is going to cover this with a lifetime warranty on the LEDs. We are going to hook it up to our external power source so that way you can see what it looks like with power running to it. Simply going to take are two-prong connection, plug it into the female ports here at the back of the housing. Give it a good push so it seats well up against the housing and in those connection points.
And then you can see here that this light sends out a really strong consistent signal. Again, it's going to be an amber light. It's going to contain eight LEDs so it has the multi-diode design which is really going to optimize our light output and it's got that nice beehive design so it kind of gives it a really neat look as the light comes out of the lens there. That is going to do it for our review of part number MCL23AB, this is the sealed beehive amber LED trailer clearance and side marker light and can also be used as a rear tracking light. Part number MCL23AB from Optronics. .
Average Customer Rating: 4.7 out of 5 stars (79 Customer Reviews)
2-1/2" Diameter beehive. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Durable polycarbonate housing. Mounts to trailer with grommet (not included). Accepts standard 2-prong plug. P2 rated.Awesome lights and fast delivery!!
Worked super,very happy
Matches the broken one on my Trailer. It is a little bit hard to install, but worked out just fine.
While stripping paint from my 1948 trailer the stripping product damaged the running lights on the trailer. The new light quickly arrived from etrailer and were easily adapted to my vintage trailer. Here's a picture of the trailer with the new lights toward the front. Thanks!
They were the exact replacement (I had to reorder to get the correct size, my fault).
Bright plug right in fits dimension as said. Good product
Had flush mount clearance lights on back of my trailer and couldn’t see where the back of trailer was at night, put these on and no problem seeing where the end of the trailer is now. They fit as they should and brightness is perfect.
these are NOT bright at all you cannot see the light is on unless you're coming at it from the full front on Ie. Facing it. the Leds don't light up the full amber lens. waste of my money
I bought this thinking it would replace the vintage lens on my 1949 Kampmaster camper. It is not just the lens but has a light built into it. It is a sealed unit. I was able to modify it to make it work.Quality seems good. Price was good.
photos of finished projectslights installed
Fit perfect
Fast delivery and exactly what I ordered. Haven't had time to replace my broken bulb yet but I'm 99% sure it's the one I need. Excellent service and product.
etrailer ,
I inherited two old boats with trailers that need a lot of work. You guys had everything I needed. Delivered on time in great shape. Great price, awesome help desk. You made me feel like I wanted to give you my money just because.
Now, THAT is called customer delight, not customer service.
Thanks again,
Gary D.
I wanted to replace my incandescent lights with LEDs, for the rear sides I went with the beehive style now I can see the rear corners of my trailer.
These lights are good quality and look great.
Don't be fooled by the cheap knock offs out there.
Perfect replacement fit. But better than that was the help I received from etrailer to find the exact replacement lights I needed. A big Thank You for that!
These look great, and are of very high quality.
CAUTION: No where in the description does it indicate that these DO NOT include any way of mounting them. If you don't have an existing mounting bracket and pigtail (as was my case) they arrive and then you realize you can't get your project done because you need more parts.
Get the parts you need, and these are great.
Works great. Looks just like the origi nal.
These really look great!
CAUTION: Nowhere in the description does it indicate that these come with NO WAY of mounting them. If you don't have an existing mounting bracket and pigtail (as was my case) they arrive and then you realize you can't get your project done because you lack parts.
Get the parts you need, and these are great!
Quality Product fit as a replacement with out any changes to vehicle wiring and mounting hole Will use this company again for other products
Good product at a good price. Replaced my regular lights with LED lights from etrailer.com. Much brighter with less power draw. happy with purchase.
Repeat customer here and always satisfied with product quality, prices and fast shipping. The side marker lights I ordered were exact fit for my snowmobile trailer. Thanks again!
Staff like these new lights because they are easier to see trailer at night when backing up.
etrailer was fast on shipping and answered questions I had! Will buy from them again
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.