LED Trailer Clearance and Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
(38 reviews)
Price: $13.68
In Stock
LED Trailer Clearance and Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Item # 328-K-501B
Our Price: $13.68
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (38)
- Q & A (0)
- Videos (1)
- Photos
Command Electronics Trailer Lights - 328-K-501B
- Clearance Lights
- Round
- LED Light
- Amber
- 2-1/2 Inch Diameter
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Command Electronics
2-1/2" Round. Trailer light with reflector functions as a clearance and side marker light when properly mounted. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. PC rated.
Features:
- Small, round trailer light functions as a clearance and side marker light when properly mounted
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base with acrylic lens
- Amber lens with amber LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - no cutout required
- 2-Wire pigtail includes power lead and ground wire
- PC rated light produces a 180-degree beam pattern
- DOT compliant
- Assembled in the USA
Specs:
- Overall dimensions: 2-1/2" diameter x 1" deep
- Distance between mounting holes (center to center): 1-5/8"
- Diodes: 2
- Wire length: 4-1/2"
- 1-Year limited warranty
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
K-501B Command Electronics LED Clearance and Side Marker Light w/ Reflex Reflector - Round - Amber Lens - Surface Mount - PC Rated
Video of LED Trailer Clearance and Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Command Electronics Trailer Lights - Clearance Lights - 328-K-501B Review
Speaker 1: Today, we're taking a look at a LED clearance or side marker light with a built-in reflex reflector. This round trailer light functions as both a clearance light and a side marker light when properly mounted. It is an LED system. LEDs make great replacements for incandescent lights. They last longer, burn brighter, and they're much more efficient. With LEDs, you don't have to worry about replacing bulbs or worry about brittle filaments.The unit features the really nice amber lens with the built-in reflex reflector.
It mounts on the surface of the trailer. You have three mount holes right there. You can gain access to those by removing the lens from the base. Mounting hardware for installation is not included. It's a two-wire pigtail, so the white wire is the ground wire, yellow wire is the power wire.
Now, the installation surface does require at least a 5/8" diameter hole for the wire base to fit into for a flush mount design. It is SAE approved, and it is a P2PC rated light.Taking a look at the dimensions real quick, starting with the overall diameter. Measuring edge to edge, that gives us a diameter measurement of about 2 1/2". The thickness of the unit, from the back of the base, right here, to the front of the lens, measures about 1" thick or 1" deep. That's how far it sticks out from the installation surface.
The distance we have between each mount hole, center on center, is 1 5/8".We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights, so you can see it in a lower light setting. You can see here that the light sends out a nice consistent signal. You can see that built-in reflex reflector.
This light features a total of two diodes or two LEDs, so the multi-diode design really helps optimize the overall light output.That's going to do it for today's look at the LED clearance or side marker light with the built-in reflex reflector.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
LED Trailer Clearance and Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens - 328-K-501B
Average Customer Rating: 4.9 out of 5 stars (38 Customer Reviews)
2-1/2" Round. Trailer light with reflector functions as a clearance and side marker light when properly mounted. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. PC rated.by: John 04/09/2024
Needed replacement marker lights for a 2015 Itasca motor home. These are exact matches, fit perfectly.
by: Chantell11/14/2022
exactly what I was looking for and received it very quickly!
by: Bob 03/25/2024
Just what I need to replace a burned out light.
by: David H06/11/2019
Light was a perfect match for the lights on my Camper. With so many light styles and color temperatures shopping for a match can be very difficult. etrailer.com is my go to for my lighting needs. I’ll be looking to them for my other trailer needs and will give a review on them in the future.
by: Bruce 04/16/2023
I’ve bought several items and pleased with ever purchase. Very timely deliveries and all ahead of stated delivery date quoted. I will buy again from etrailer.
Thank you etrailer.com
by: Everett 04/12/2023
It was exactly what I needed to match the other lights on the trailer!
by: Antonio 08/24/2023
Me gustaría que tuvieran servicio en Es pañol
by: Eric02/09/2021
Eric B.
2/10/2022
Well it’s been a year and still looks and works like brand new. I would buy it again when needed. Excellent light replacement for my new camper. Ez to install
by: Bruce05/30/2019
The light is just fine. I did expect white LED in it vs. amber but it's okay. I didn't see white LED specifically mentioned.
by: Michael07/29/2019
Perfect replacement for the original light on my trailer that failed.
by: Paul 09/13/2022
Great light. The base needs to be white to match. But the light works..
by: John 01/26/2023
Looks like the part I need
by: Derek05/30/2019
Was exactly what I needed for 2016 motor home
by: Bryan 06/14/2021
Exact replacement at a competitive price. Exactly what I wanted.
by: Dylan12/30/2022
very quick delivery time for standard s hipping.
by: John 08/11/2022
Lights fit perfectly,worked great. Will order again, when deeded. Thank You
by: Michael02/10/2022
Good durability, easy to install, good price to value ratio. Bulbs are quite bright.
by: Norman10/30/2018
Product was exactly as shown in pictures and shipped in a timely manner. Very pleased with the lights.
by: Scott 11/02/2021
Perfect fit. Shipped quickly and arrived as described.
by: Keith07/31/2018
Excellent service
Nice job getting my package delivered
by: Roland 08/30/2020
always great price--fast shipping--great staff
by: Kathy 03/04/2021
Part just as described, shipped quickly.
by: Richard 10/29/2020
Exactly what I expected, fast shipping
by: William04/28/2024
25
38
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Recommended Replacement Marker Lights For a Vintage Trailer With 2-1/2" Round LightsI recommend considering the LED Trailer Clearance/Marker lights. These are available in Red # 328-K-500B and Amber # 328-K-501B. They are the same 2-1/2" diameter and have a simple 2 wire connection like your current lights. The LED diodes use far less power than the incandescent lights you likely have so it is easier on your older wiring.
view full answer...
Info for this part was:
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Justice A
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chantell
11/15/2023
STILL WORKING GREAT!!!!!!!